Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Can you wash an oilstone?

Featured Replies

I picked up an old Norton medium India stone and it was apparently used dry at some point because it has some metal built up in spots on its surface.

What would be the best way to get those off if I don't have a diamond plate?

Wash it? Sandpaper?

Greg, I think I would try using some wet/dry sandpaper on a piece of glass. Treat it just like you were trying to flatten it.

In my experience sandpaper does not do a great job flattening oil stones.  The oil stones (natural or india) are not friable enough and will wear out the grit on the sandpaper before any real cleaning or flattening gets done. A flattish cinder block works better, but better yet is to put some 80-100 grit loose Silicon Carbide or loose diamonds on that cinder block or a floor tile/other flat surface and go to town.  They will do a MUCH better job. You can get loose diamonds and SiC on ebay for pretty cheap. You can also get loose SiC from LV.  

 

Definitely lap your stone but don't worry about a few spots. Even with oil some of that dark swarf settles in and its pretty darn impossible to get all the gray color out.  A new india will have some discoloration in at after just a couple uses.  As long as the stone isn't clogged (and if its cutting well it isn't clogged) the spots are not something to be concerned about.    BTW another plus of lapping something like a medium india is that this will expose fresh abrasive and make it cut faster for a while regardless of whether not it was clogged.  Because they are not friable the abrasive in oil stones tends to wear so roughing them up periodically keeps them cutting faster.

 

Oh, and yes can wash an oil stone. I sometimes will scrub my indias with soap and water, and some people periodically put oil stones in the dishwasher.

  • Author

Good advice - thanks. I keep looking for the one true sharpening system but I think the one I have now is as good as any.

"people periodically put oil stones in the dishwasher" how to annoy the other half it one easy step.  :) 

 

Just don't tell them it's the new butter dish.  (or have the kids empty the dishwasher that load.)

Hi Greg,

 

I found a little section within one of my books (1930s vintage) called "Care Of Stones", thought I would share it although don't try this at home.

 

"Only the best oils should be used, as inferior oils soon form a skin on the surface and in the pores of the stone. The skin can be removed by rubbing the stone on emery cloth or washing with paraffin. In extreme cases, where oil has percolated into the stone, the "Washita" makers suggest removing the oil by burning; but this is a drastic remedy and should be avoided if possible. The most suitable oil is a mixture of neatsfoot and sweet oil."

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.