Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finish for antique dining table

Featured Replies

I'm looking for recommendations to refinish an antique dining table. The table was last refinished by my mother in 1965; she doesn't have a lot of details other than she stripped, sanded, stained, and applied 10 coats of varnish. The varnish has cracked and there are a few dings where the color needs to be redone - so it looks like I'll be repeating her work to preserve this piece. My main concern is the top coat, I have 5 kids so I'm certain that the table will see some abuse but I also want to preserve the value as an antique. I've been told not to apply a poly finish because it will be hard to remove in the future (and possibly destroy the value) so I'm guessing that varnish is the way to go. The question now is which type of varnish. I believe that the wood is mahogany.

Any recommendations would be appreciated.

Thanks,

Matt

post-13685-0-07350100-1363213513_thumb.j

post-13685-0-06076300-1363213531_thumb.j

Hey Matt. The table looks more like walnut to me, but the glare on the top blocks out a lot of the detail. The table appears to be made of plywood with a hardwood edge band around it. If you sand the top down to the bare wood surface, make sure you don't sand through the veneer. It is very thin. If you just want to restore the existing surface, you might try some of the products that have come out specifically for restoring old cracked surfaces. There are several of them on the shelf at Lowes. I've never used them myself. I just noted them when I was looking for wax finishes one day.

The pics are blurry so it's hard to say for sure, but I'm almost certain it's not mahogany, and I don't think it's walnut either.  It looks to me like a lighter wood stained dark.  The second pic looks like a blotchy stain on poplar, and the edge banding looks like red oak.  But I agree with Baker...it's most likely plywood, judging from the way the top was constructed...solid wood would have blown out that banding many years ago.  You're in for a tough refinish I think.

 

If it were a valuable antique, the damage to the value was already done in 1965 when it was originally refinished...collectors would rather have a beat up original finish than a nice looking new one...so I wouldn't worry about it now.  If you have five kids, poly is a no brainer.  Satin hides flaws the best.  And FYI, polyurethane is varnish. :)

Clean the surface good with mineral spirits and lightly sand or stuff with scotch bright pad then clean again with mineral spirits. I would use Zinsser SealCoat dewaxed shellac as a barrier coat in case finishes are incompatible then apply poly as suggested above.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.