Recommended Posts

Posted

Depends on the size of the turning.  I'd use a 1/4 or 3/8 sorby spindle gouge for small turnings such as xmas ornament caps and finials and a 1/2 or larger when turning a 3x3" table leg. 

 

I find the grind of the gouge to make the most difference.  I use a fingernail grind at about 35 degrees then relieve the back of the bevel so I have less than 1/8" bevel behind the cutting edge.  This permits me to get into the nooks and crannies around detail work.

Posted

I'm a little different (as should be obvious by now)...

 

I like a 1" skew.  I'll still rough out with a spindle gouge, making my way through all of them before I sharpen (I've misplaced my grinder...), but I find I like the skew better for almost every task.  Certainly requires attention.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.