220-221 Posted March 23, 2013 Report Posted March 23, 2013 Need to pick up some sandpaper for my new 150/3. It seems that festool recommends rubin for bare wood, but it sounds like it clogs fast and stops cutting sooner that the new granat. Now add to that there is a new rubin 2 out that is suppose to be way better than the old rubin, but is it as good as the granat? So my question is which type should I get? Quote
wdwerker Posted March 24, 2013 Report Posted March 24, 2013 We keep our Rubin sandpaper clean with a crepe rubber block if the wood is full of paper clogging resin. Haven't tried the granat yet. Quote
jmaichel Posted March 24, 2013 Report Posted March 24, 2013 I have used Granat, Rubin and Brilliant and prefer Granat. Quote
wdwerker Posted March 24, 2013 Report Posted March 24, 2013 I just did a little reading and Granat is reccomended for sanding finishes, paint and solid surfaces. Quote
pghmyn Posted March 24, 2013 Report Posted March 24, 2013 I have Granat, and it is the only one I have used so far. I have 80-180 of granat, and I will be picking up 220 of Rubin 2. I asked the same question over at the FOG forum, and the basic consensus was Granat is a really good all around abrasive. I would recommend buying this one. Quote
woodwhisperer Posted March 24, 2013 Report Posted March 24, 2013 I have been favoring Granat myself as well. But now that Rubin2 is out, we'll have to see. Quote
Eric. Posted March 24, 2013 Report Posted March 24, 2013 I have been favoring Granat myself as well. But now that Rubin2 is out, we'll have to see. A quick review video once you get your hands on some would be sweet for us Fesfreaks...or even just an article or a post here. Experimentation with anything Festool is costly. Quote
woodwhisperer Posted March 24, 2013 Report Posted March 24, 2013 I doubt it will be video-worthy but I'll be happy to give some feedback once I have enough hands-on time. Quote
220-221 Posted March 25, 2013 Author Report Posted March 25, 2013 Well I decided to go with garnat because not all my sanding is bare wood for finishing. some is taking finish off and refinishing or taking paint off and I'd rather not have to stock multiple types. But Marc I would definitly be interested in a comparison. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.