Recommended Posts

Posted

Working on reclaimed barn beams and didn't check well enough, hit a small nail.

Is it realistic to try to take-out nicks in blades myself on a stone?

I have a ridgid 6 1/8 inch jointer

Nicks are small.

If not , should I have them sharpened or just buy new?

Posted

Last time I bought jointer blades, they were about 50 dollar for a set. The real work is not in replacing them, it's in setting them up properly. Usually you need a knife setting jig for this, but some use the alternate method normally mentioned in the instruction manuals.

Some do hone their own blades, and lee valley offers a sharpening jig to help http://www.leevalley.com/en/wood/page.aspx?p=33002&cat=1,43072,43078 .

The jig is more expensive than a set of 6 inch blades for my delta x model. I would just replace and save the hassle. Marc has a good podcast on setting jointer knives if you are interested.

Posted

Working on reclaimed barn beams and didn't check well enough, hit a small nail.

Is it realistic to try to take-out nicks in blades myself on a stone?

I have a ridgid 6 1/8 inch jointer

Nicks are small.

If not , should I have them sharpened or just buy new?

Chips need re grinding. No honing is just for touching up. You will have to compare new to re grinding.

Posted

Should cost you right around $18 to send the set out to get sharpened. I take mine down to my local Rockler store and they send them out for me, and give me a call when the blades are done.

 

I bought the Tormek attachment for sharpening jointer blades. Complete waste of money. It takes a good 2-3 hours for me to sharpen the blades with the Tormek jig, and it cost in the neighborhood of $150 as I recall. Ugh. Costs me money every time I use it, as I could easily be making $30 per hour in the shop doing real work. Maybe if I adapt it to use on my 1750 RPM grinder?

 

I also have the Lee Valley jig mentioned above, but I've never used it. (Got it as a present).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 53 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined