Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Staining Burl Veneer to Match

Featured Replies

I am building the steamer trunk that Marc built for Duane in TWW episode 82. For the frame, I chose walnut stained with General Finishes Empire Red water-based dye stain and Arm-R-Seal topcoat.  Ever wanting to challenge myself, I am also going to try to veneer my own panels for the first time.  I bought some walnut burl veneer which looks awesome, but due to the price (and the fact that I ordered almost too small of a batch to complete the project) I don't want to sacrifice a lot of it to test pieces.  I did one test and found out that this stuff soaks up stain worse than end grain - so dark in fact that it masks the burl altogether and looks awful.  The panel doesn't have to match the frame exactly, but needs some red in it so not to clash with the frame.  How can I lighten the color while still keeping the burl as the prominent feature of the panel?

 
Some things I thought of so far are:
 - Shellac seal coat
 - Spraying the stain with an HVLP (I wiped it on with a rag for the test)
 - Thinning the stain with water (can this even be done?)
 - Pre-wetting the veneer before staining
 - A different dye or stain, perhaps?

How about treating the frames to match the burl instead of the other way around, and just leave the burl natural with a clear finish?  A little more brown to tone down the red in the frames?

  • Author

The friend I am building this for wanted the red color.  When I showed him some samples, I only sampled some solid walnut I had on hand.  I didn't realize how drastic the difference would be.  I think given the size of the panels compared to the frame, along with the darkness of the veneer makes it clash too much.  I need at least some red in the veneer.

You can thin the dye by diluting it. Thin it until it is just a tint and then use multiple coats to sneak up on the desired color.

  • Author

It is thin veneer.  The test piece I used was glued to the substrate when I tested it.  How much can should I thin the stain, 50%?

Agreed with Tkf. I would first seal with light coat of shellac. Then add a small amount of dye to the shellac and build up your color. That way you don't have the blotching and can always wipe the color off if its too much with denat. alcohol. This is a job for spraying. HTH

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.