rodger. Posted May 12, 2013 Report Posted May 12, 2013 There is a guy selling a delta drum sander for 450, but he said he would accept 375. Looks like its in good shape. Can anyone offer advice? Model is delta 31-250C. http://toronto.kijiji.ca/c-buy-and-sell-tools-power-tools-Delta-Drum-Sander-W0QQAdIdZ478381685 It's going for 450, but I think I can get him down to 350. Quote
wdwerker Posted May 12, 2013 Report Posted May 12, 2013 Good luck with that. Check the bearings for slop, wiggle or play. I really enjoy the accuracy I get from mine. Zero tearout as well! Quote
rodger. Posted May 12, 2013 Author Report Posted May 12, 2013 Good luck with that. Check the bearings for slop, wiggle or play. I really enjoy the accuracy I get from mine. Zero tearout as well! Is buying a used drum sander a poor idea? Quote
wdwerker Posted May 12, 2013 Report Posted May 12, 2013 Not at all. Just grab the drum and try to wiggle it up and down. If it has tons of hours on it the bearings could have too much play in them. I would imagine most hobbiest owned machines are not worn out. There is a learning curve to running one. If you take too much off in one pass you can load up the sandpaper with resin and cause a burn on your wood. 1 Quote
rodger. Posted May 12, 2013 Author Report Posted May 12, 2013 I went to look at it and it was sold! Guess I shoulda moved faster. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.