dodgeram99 Posted May 18, 2013 Report Share Posted May 18, 2013 I know this project is way over. But I just started building this. Marc what size of cove bit did you use? I have seen a 1 7/8 at Rockler. Is this to big? Quote Link to comment Share on other sites More sharing options...
kronewi Posted May 20, 2013 Report Share Posted May 20, 2013 Looking at the project files he gave 2 variations for the moulding. In one it looks like he used a 1" cove for the top and bottom moulding. In the second he used a 1 3/4" cove for the upper moulding. I would think a 1 7/8" cove would be acceptable for the top moulding if that is the design you are following. Kevin Quote Link to comment Share on other sites More sharing options...
dodgeram99 Posted May 23, 2013 Author Report Share Posted May 23, 2013 Thanks Quote Link to comment Share on other sites More sharing options...
thewoodwhisperer Posted May 23, 2013 Report Share Posted May 23, 2013 Sorry I'm late to respond here but it looks like Kevin took care of you. Thanks Kevin. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.