Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

kitchen cabinets cherry faced

Featured Replies

Hi everyone! I am new to the forum and I realize that perhaps back in time this question must have come up many times but I can't find anything specific as I go back in posts. I am thinking of taking on a task that seems monumental to me and that is making my own kitchen cabinets. One of my biggest concerns is the finish. I am planning on making the boxes and the faces and having the doors made by someone who has the tools and experience. My question is how to I go about finishing them. Do I need to pay attention to wood grain differences? Cherry darkens differently per board. What is the best way to stain them? What finish should I use for top coat? should I brush or spray?  If spray should I use an electric sprayer. I am worried about water droplets if I us my normal compressor. Either way I have to buy a gun. Is there any video or book information that will help me with the whole job?  I know this is a lot but if anyone has any thoughts about anything mentioned I would appreciate it. My wife wants this finish to look like the cabinet shop display. Is this possible for me to achieve without a controlled environment.

 

Tom  

Welcome to the forum tom5.

Finishing is a topic in itself. Personally, I like to keep it simple. If I want dark finish, I use a dark wood. If I want a light finish, I use a light wood. Is there a reason you want to stain the cherry? Cherry is expensive, and looks beautiful without a stain.

I finished a walnut kitchen island recently, and I used 6 coats of wipe on polyurethane (oil based). It came our really nice, and is very durable. All I needed was a rag and some wet dry sandpaper.

As for coloration, be very careful when selecting your boards. This is a task often overlooked by newer woodworkers. Take your time and choose you stock very carefully, looking for grain and colour matches. Take a cup of coffee to the hardwood dealer and settle in for while to pick through the stacks. Make sure you leave them neater than you found them, as steve always says.

Depending on the door style and your shop equipment, tackling a set of doors can be fun and rewarding. It can be accomplished in a variety of ways, from a simple table saw set up to an elaborate router table routine. Do you want raised panels in your doors?

Taunton press has a good book on kitchen cabinets:

http://www.tauntonstore.com/building-kitchen-cabinets-udo-schmidt-070614.html

Spray definitely spray. I'd recommend a catalyzed lacquer. A spray booth is highly required. Someone will force me to mention a vinyl sealer too so hear it is. You shouldn't need to worry about the wood grain as this should be the cabinetmaker's job. Once you chose the face side you're good to go. Now what colour are you ideally planing to stain?

Is there a water trap on your compressor?

My wife wants this finish to look like the cabinet shop display. Is this possible for me to achieve without a controlled environment.

 

Tom

Not without some experience. The door and drawer shop is not going to color match the whole kitchen just the wood used in each. Meaning you will need to learn to equalize the color for the whole kitchen. That's one reason we charge so much for kitchens. :)

You can do a pretty good job with a little practice. I'd suggest you get a hvlp system compressor or turbine and practice on full sheets of ply. Buy a sheet spray it with vinyl sealer and a good precat solvent lacquer. By the time your done with enough sheets for the whole kitchen you will have a little practice.

Go to rodda or sherwin Williams and have them mix a spray stain as an equalizer. Glue up some scraps and practice finishing. When the wife is happy then move to the face frames and doors. FYI prefinished ply needs screws even if you dado. Finish face frames off the boxes.

  • Author

Thanks everyone for the helpful information. My wife saw a pecan stained cherry in a cabinet showroom and liked it. I normally would not stain cherry but thought in this case besides my wife liking the pecan stain it would help make the color match a bit more forgiving, but I will have to think about it. The doors she wants are the shaker style so I might do the doors also thus eliminating the problem with me making the face frames and trying to match it to some else's doors. In that case I may not stain. I looks like I will have to learn more about the sprayers recommended. If I decide to do this job I will let you know how it turns out.

 

Thanks again,

Tom

Hey Tom. Welcome to the forum. Make sure you show us some pics as your project progresses.

  • Author

Hi Tom

I would suggest you to choose walnut. Franklin is right, cherry is very costly though its has a nice look. You can also choose oak or pine. Check this website for more ideas http://discountkitchencabinets.ca

Thanks, I will consider that. Nice cabinets!  Did you make them? Are they walnut? 

Thanks, I will consider that. Nice cabinets!  Did you make them? Are they walnut?

Walnut can be quite pricey as well. Is walnut closer to the final colour you are looking for?

Thanks, I will consider that. Nice cabinets!  Did you make them? Are they walnut? 

 

Tom,

 

Their fake. I sell to the local up in Renton that retails those cabinets. Maybe an SEO spam.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.