Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Matching lacquer sheen

Featured Replies

I'm going to be working on a project at church where I'll have to match the finish on the pews that we are buying new, i.e. altar, railings, and trim I'm building/installing need to match. They use MinWax stain (that parts easy), with a pre-cat lacquer finish for the pews. I'm going to get samples from them, but does anyone have any recommendations on what I should use to match the sheen of that lacquer? I expect it will be between a satin and a semigloss. I have the ability to spray (never tried lacquer though) and use mostly General Finishes products. Will be using red oak. Thanks for any help!

Take a sample to your supplier. If you know the company used minwax??? Then prestain some test pieces to take with you. The sheen can be matched by starting off one level glossier and flattening as needed.

How about this approach, I may be missing something...but have that someone at the church who ordered/purchased the new pews, contact that company to find out what they topcoated the pews with. No guess work and takes the worry off your shoulders.

 

 

-Ace-

If you can't use the same product, as Ace suggests...

 

Find out what product the company is using, and look up the product info sheet for the glossmeter numbers.   Choose your product with the same number, if possible.  All pro products that I've used provide this information,

 

AFAIK, they range from 0 (incredibly flat) to 100 (a show car builder's dream).

 

Most wood finishes will rate out between 25 (flat) to 85 (gloss), with dulls and satins in the 40's and 50's, and semi's in the 60's.  If you're within 5 points, you'll be fine on separate items, and close enough to rub in touch ups.

  • Author

Thanks Cessna, I'll get the sheen number from the pew company, and when they send me samples should be easy to match.

Particle Board, how do I "flatten as needed". Dim the lights? :)

Thanks Cessna, I'll get the sheen number from the pew company, and when they send me samples should be easy to match.

Particle Board, how do I "flatten as needed". Dim the lights? :)

Add flattening agents. Or steel wool the piece.

Thanks Cessna, I'll get the sheen number from the pew company, and when they send me samples should be easy to match.

Particle Board, how do I "flatten as needed". Dim the lights? :)

You take samples to your finish supplier. They add flattening paste as needed. Very simple when you can't get the finish specs from builders. If they use custom sheens like most of us do it may be your only option.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.