Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oil Finishes and Shellac

Featured Replies

I am in the process of refinishing an old builtin break front, I think it was built around 1915.  The people before me decided the quartersawn white oak would look much better if they painted it white.  I sanded off the white paint and am now trying to get as close as I can to the original finish.  There are a few places where the original finish seems to be intact, it looks to me like a pigmented stain with amber shellac over it.  Putting the amber shellac over the bare wood didn't look right -- too orange.  I have played around with different stains and such and I think an oil based pigment stain with amber shellac over the top looks like the best match.  I was thinking I would put a topcoat of ArmRSeal over it -- I guess to 'protect' the shellac as it is a pretty soft film then maybe finish it with some wax.  Is this 'proper'?  Would I be better off just leaving the shellac as the final top coat?  I don't work with oil based finishes as much so any guidance would be appreciated.  I would like to stay as historically accurate as possible here, so I am not inclined to use water based finishes even though that is what I use on everything else.

 

Thanks.

I used Waterlox and just loved it. Never gave Shellac much of a chance so I can't compare them. Waterlox was easy.

Do you plan to spill vodka on the piece?  If not, cured shellac is perfectly acceptable as a top coat all by itself.

"Historically accurate" is indeed fun; but shellac still wins for me even in modern pieces:  Being able to lay down half a dozen coats in less time than a single coat of oil is just plain awesome.

  • Author

I think waterlox is the varnish I am looking for, thanks.  I think I may just top coat it with shellac and see how that goes.  There are some good sized flat surfaces but if the shellac gets damaged it is easy enough to repair and then top coat with the waterlox.

 

Thanks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.