dwacker Posted July 22, 2013 Report Posted July 22, 2013 I bought 300lbs of 6013 a few years ago real cheap surplus. It seems to be moisture contaminated. Can I save this rod by baking in the oven or is it just scrap metal? I dont have a rod oven, would have to use the kitchen oven. Thank you Quote
rodger. Posted July 22, 2013 Report Posted July 22, 2013 I don't have an answer for you, but you may want to try ridgidforum.com. Lots of metal guys on there that may be able to help you. Quote
dwacker Posted July 22, 2013 Author Report Posted July 22, 2013 I don't have an answer for you, but you may want to try ridgidforum.com. Lots of metal guys on there that may be able to help you. Thanks I was hoping someone here was actually a welder. Im finding conflicting information all over the internet. Quote
jimmykx250 Posted July 22, 2013 Report Posted July 22, 2013 Not sure but I believe you should be able to cook the mositure out of the rod, we have ovens that are used to keep the moisture out but never have tried to get rid of existing moisture. Try a couple rods wrapped in tin foil in your home oven first- its the same thing and if it doesn't work there then you know. Quote
..Kev Posted July 22, 2013 Report Posted July 22, 2013 Ultimately, it depends on what you're using it for. For me personally, I don't think I would. The outer shell is the flux which may be compromised by the moisture. This in turn could effect the quality of the weld. Just my 2 cents. Quote
dwacker Posted July 22, 2013 Author Report Posted July 22, 2013 The 6013 is usually a good dirt electrode but this stuff is finicky so im just guessing its moisture. Ill try baking it for awhile, just didnt want to waste the electricity if it is a waste of time. Quote
..Kev Posted July 23, 2013 Report Posted July 23, 2013 Good luck PB, please let us know how it works. I checked with some of the welders at work today and got the same mixed reviews as you did on line. Quote
wtnhighlander Posted July 23, 2013 Report Posted July 23, 2013 You should be able to salvage a good portion of your red supply, unless they are so wet that the flux coating is flaking off. Bring the heat up slow, and don't go too hot. Driving the moisture out too quick is likely to do more damage. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.