Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Newbie, computer desk with armoire style shelves attached

Featured Replies

Hi all, new woodworker here. I am not sure I'm in the right area of the forum with this post. I'm creating a custom computer desk. My inspiration was the desk from the movie oblivion. I'm torn between having a top shelf or just the clean look. I figured to lets some pros give some pointers cuz this is the first piece of furniture I'm creating from scratch. Here are some sketch up concepts.post-14328-0-10104700-1375206489_thumb.jpost-14328-0-16018200-1375206499_thumb.j

The reason for the desk is to house three motherboards (computers) inside the main desk area (underneath the top shelves u see in one of the pictures) that's why u see a protruding area near where the legs would go if ur up against the desk. On the left is to house a receiver, cable box, blu-ray etc.. And on the right most leg shelves are for two printers I use.

Interesting concept.  I haven't seen the movie but I'll take your word for it.  It's certainly an ambitious design for a first time out.  In no particular order, here's what jumps to mind:

  • I prefer the first sketch without the cubbyholes on top.  Looks more futuristic that way.
  • The thickness of the top gives ample possibilities for cable management.  For that matter, if you're clever with computer internals, you could conceivably make the desktop itself house the CPU.
  • The cantilevered printer shelves on the right are quite daring.  How do you intend to support them?
  • I like the curves that join the tops and sides, but they need some more thought.  Right now, you have the same radius curve on both the inside and the outside and this looks wrong.  If you're going to curve the joints between tops and sides, then the curves should swing from a single point, meaning the outside will have a significantly larger, gentler radius than the inside.

What do you have in mind for materials?  Looking at the curve from desktop to right side, I could see doing this as a stacked lamination using plywood.  Your entire desk surface would then be plywood endgrain which could either be veneered, painted, or (my choice) finished au naturel.

Hi - welcome to the forum.  +1 on an ambitious design.  You say you are a new woodworker.   What machines and tools do you have?   While your tools do not totally limit what you can built, it sure makes it easier to achieve some aspects of your design. 

 

Precisely why I recommended building it as a stacked lamination with plywood.  One can do that with a jigsaw and a belt sander.  OTOH, a bent lamination would tax even the abilities of David Marks himself.

  • 1 month later...
  • Author

Interesting concept. I haven't seen the movie but I'll take your word for it. It's certainly an ambitious design for a first time out. In no particular order, here's what jumps to mind:

  • I prefer the first sketch without the cubbyholes on top. Looks more futuristic that way.
  • The thickness of the top gives ample possibilities for cable management. For that matter, if you're clever with computer internals, you could conceivably make the desktop itself house the CPU.
  • The cantilevered printer shelves on the right are quite daring. How do you intend to support them?
  • I like the curves that join the tops and sides, but they need some more thought. Right now, you have the same radius curve on both the inside and the outside and this looks wrong. If you're going to curve the joints between tops and sides, then the curves should swing from a single point, meaning the outside will have a significantly larger, gentler radius than the inside.
What do you have in mind for materials? Looking at the curve from desktop to right side, I could see doing this as a stacked lamination using plywood. Your entire desk surface would then be plywood endgrain which could either be veneered, painted, or (my choice) finished au naturel.

I prefer the non cubby version as well, as for the desk becoming the computer case that was my intention all along, three motherboards will be enclosed, and plexiglass will cover them and act as the desk face (where you would put your keyboard) in order to not have the plexiglass bend so much (hopefully not at all) ill be incorporating a airflow in taking from underneath up and through over to the left shelves, where again a system of intake fans and exhaust fans will hopefully keep everything nice and cool.

The cantilevered printer shelves I had an idea to run conduit (maybe 3/4) from one side of the leg through and out the other side. the leg in those areas will be solid wood I saw a way ikea design a shelf there they did something very similar and worked beautifully.

The curved joints was a thought but I had the same thought u did and decided against it, maybe the outside curve will stay.

Materials is as u thought plywood and the finish will be all natural, just a great sanding job and I'm going to try and make this thing look as shiny as I can I will paint it white, and where the computer is to be house will be black.. At least these are all the thoughts I have, who knows if I can accomplish it the way I want but I'm going to try my best.

Sent from my iPad using Tapatalk HD

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.