Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood putty residue

Featured Replies

I am making some mitred platforms out of 3/4 maple ply, then using a dye stain, and finishing with polyacrylic.  I have been filling in my nail holes and any small imperfections in my mitres with a stainable wood putty.  The problem I am having, is that the putty leaves a residue around the hole that doesnt want to stain, and if I miss getting some of it off while sanding, it leaves a light spot when I stain.  The stain itself stains just fine, it is just the residue it leaves around the hole.  Sometimes, this residue is kind of tough to sand away, and can be hard to tell if it is totally gone till I have stained.  The maple also seems to stain better the less that I sand, so trying to avoid too much sanding, or really having to go at it with the sander and risk leaving sanding marks in the tough to get spots, is there another solution to getting rid of this?

 

I've tried water and a rag, and it didnt seem to do much.  Is there anything else I could try and clean it with?  Should I try attacking the problem before the putty dries all the way?  Seems like it might not get in so deep if I did this, but that also gunks up my sanding discs pretty quick.  Thoughts?

Leave it proud, let it harden, then shave it with a super sharp chisel or Stanley knife blade. The surface will be too smooth but you will only need a few passes of sanding for texture.

  • Popular Post

Go get a fresh roll of painters tape. Drill holes in the fresh roll all the way around every 1" or so and hang it on your wall. Put a piece of the tape with the hole over the nail hole. Fill with your putty to the top of the tape. When dry remove the tape and sand.

You could also just place a square of blue tape wherever you want to nail and then nail through it, putty, and peel the tape. Easier than drilling holes in your tape, at any rate.

You could also just place a square of blue tape wherever you want to nail and then nail through it, putty, and peel the tape. Easier than drilling holes in your tape, at any rate.

That works good if you plan ahead and turn the nail with the grain.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.