Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Floor

Featured Replies

There have been a couple of threads regarding a shop floor - mostly directed at placing placing a floor over concrete.

 

I my case, I will be setting up my shop in a spare room in my home -- approx 20' x 16'.  The current subfloor is plywood over joists.

 

I'd like to add flooring (not just plywood) and would appreciate some suggestions.

 

I have been considering:

 

1. VCT (vinyl composition tile)

 

2. Laminate floating floor.

 

3. Wood flooring

 

I am concerned about durability, the point load of my power tools (on casters), cost, and aesthetics.

 

I'd appreciate any input/suggestions.

 

rjh

Its hard to say without knowing more about the weight of your machines. Im looking at flooring for my shop now. The flooring contractor that is doing my house now gave me some laminate stuff and I put it under my band saw for a week. Took it out and it was crushed but my saw weighs 1000 pounds. I dont want plywood either but may settle on finished plywood to save money.

You can get Ipe t&g flooring from Banner Elk Trading in Atlanta for $2.89 a lineal foot. It's kiln dried and is not effected by moisture, so you don't have to worry about wood movement. It wears like iron, only without the rust. :)

Budget could/would effect the choice as well.

I'm planning to add a 24 x 40 room on one side of one of my farm shop buildings for woodworking. It'll have a framed floor with ductwork underneath.  I'm planning to use the cheapest grade of 2-1/4" oak flooring, sand it, and just leave it unfinished.  I have a 16 x36 woodworking shop in another building, but I'm going to let our Daughter use that for art stuff.

I LOVE solid wood flooring in a shop...  It's not so hard on dropped tools, decent on feet, bright, and it looks great.

 

I've seen lots of wood and small industrial shops, with some pretty big machines, on wood flooring.  One of our bicycle shops is a ~ 110 year old four story building.  For 90 something years, it was a plumbing supply house and sheet metal shop.  The 90 years saw plenty of machinery, heavy storage, and even a fork lift, operating on the oak and maple wood floors.   The previous owner didn't apply a film finish, it was linseed oiled. 

 

Many vendors can supply lower grades of hardwood flooring that is just as functional as what you'd put in a highly visible finish location, but with visual defects, for 50-70% less than top grade.

 

I'd avoid laminate. I just don't think it would hold up.  VCT would be fine on concrete, as would epoxy paint with a non-slip additive.

In my second shop I put in the absolute lowest cost Pergo-like laminate flooring. It chipped from time to time, but never scratched... strange? I was surprised how well it held up. Plus, dried glue scraped right off it. Anyway, what I hated about it was that with a layer of sawdust it was as slippery as an ice-skating rink.

 

I have a buddy who ripped sheets of construction grade 4x8 plywood into 8" strips, added a tongue and grove at the router table and then laid that down in a huge parquet pattern. He did 2 coats of standard poly on it and It looks awesome. It is also very durable. It's been in his shop for like 20 years.

 

My current shop has rubber mat cover nearly the entire floor. Under that is concrete.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.