Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

fold away router table

Featured Replies

anyone have or seen a decent fold away router table? I thought I would hang a router table from the edge of work bench that I can swing up to route the edge of some projects and then I could just put it away when I am done.

 

http://www.woodsmith.com/files/issues/156/fold-away-router-table.pdf

  • 2 weeks later...

I've seen plans for a swing down table in wood magazine, it basically pivoted down into a cabinet and locked up with a sliding gate latch. Seemed like it would be nice for a small router.

I have a wing on a table saw that is handy for quick runs, and doesn't take up much space.  After using several of these (the attached picture) on a project, I wouldn't take time to make anything more complicated for a router table. Dust collection is 100% simply by plugging in a shop vac, and I have several set up for different steps of the process.

post-14184-0-72687900-1379853858_thumb.j

  • Author

I have a wing on a table saw that is handy for quick runs, and doesn't take up much space.  After using several of these (the attached picture) on a project, I wouldn't take time to make anything more complicated for a router table. Dust collection is 100% simply by plugging in a shop vac, and I have several set up for different steps of the process.

 

it does not look like you have much room for anything bigger then a inch or so.   im guessing you use that for specific job and don't change the bit/ depth that much?

Exactly.  It's for one run only.  1.080" thick.  The fence was run to thickness at the same time as the hundred or so pieces, so it needs no other hold down than the dust collection top.  The dust collection works better than any machine of any type I've ever seen.  Once the top was fitted to the router, the rest was very little trouble or time to set up.

those are both interesting routers I like the hanging cabinet one a lot I just wonder if it can handle vibration from the router.

other one would be nice to store it until you need it .

  • Author

Exactly.  It's for one run only.  1.080" thick.  The fence was run to thickness at the same time as the hundred or so pieces, so it needs no other hold down than the dust collection top.  The dust collection works better than any machine of any type I've ever seen.  Once the top was fitted to the router, the rest was very little trouble or time to set up.

 

http://www.woodcraft.com/product/2005140/30464/keen-products-router-table-dust-collection-accessory.aspx I bought this it works great for dust collection leaving next to nothing behind. got a cheap skill router table that I found at fathers house.  its a bench top model but it will work for now.

Yeah, I use that exact same thing on the lift in the table saw wing, but I don't leave the top branch on it all the time.  It still dumps some sawdust down on the motor, but works pretty good.  My custom tops don't allow even any fine dust to go down to the motor.  A lift is a convienient thing to have, but sometimes I have multiple routers set up, so the others are just set up for running one profile.  Having the cheap digital height measurer saves a lot of time, and works plenty good enough with the 7518s by screwing the motor up and down while it's laying over on it's side on top of a bench.

 

http://www.ebay.com/itm/iGaging-5-Digital-Height-Depth-Gauge-Router-Table-Saw-Set-Up-Tool-/140649619621?pt=LH_DefaultDomain_0&hash=item20bf5ee0a5

  • Author

been able to put a bench top router table down there then hooked up a dust collection too it.  it does not produce any dust in the basement.  this is what I got  http://www.amazon.com/Dust-Collector-Kit-Router-Tables/dp/B0045622RE/ref=sr_1_1?ie=UTF8&qid=1380072006&sr=8-1&keywords=Router+Dust+Collection but I think im going to buy a new router something with a lift that way I can have a decent router when I move on.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.