Pbmaster11 Posted October 24, 2013 Report Posted October 24, 2013 http://www.tigerstop.com/Products/SawGear.aspx Cool product... more contractor based? can it handle the extreme precision of a furniture maker?? saw it on this old house! Quote
Pbmaster11 Posted October 24, 2013 Author Report Posted October 24, 2013 holy buckets it is expensive! http://www.sawgear.com/Portals/0/Documents/SawGear_Order_Form_2013.pdf Quote
Spencer_J Posted October 24, 2013 Report Posted October 24, 2013 Time= money i can think of at least 3 jobs i've done were that thing would have paid for itself. Thanks for sharing. I haven't seen one in person but i'm sure it would do well in a home shop Quote
Tpt life Posted October 24, 2013 Report Posted October 24, 2013 I can see this both ways. Lots of shops rough cut on a compound miter, then mill, then final cut/fit. In the rough stage I can easily see this help a guy to batch out a thousand parts without needing to touch a tape or ruler except for occasional QC. The other side is this would be overkill for guys who never cut more than ten or twelve parts at a time. Quote
Alan Bienlein Posted October 24, 2013 Report Posted October 24, 2013 Yes this can be used for furniture making. We have two of them in the shop I work in. We use them to cut face frame parts that are taken directly to assembly and also for cope and stick doors and drawer fronts. Just type in the length you want and cut. It's always right on the money and very very repeatable. Ours measure to 3 decimal places and have used that feature on it to adjust some parts accordingly. Quote
Pbmaster11 Posted October 25, 2013 Author Report Posted October 25, 2013 wow thanks for the information guys! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.