Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Waterborne and pinholes in walnut

Featured Replies

So I have a bunch of HVLP test boards and one thing are the walnut ones have tiny random pinholes that only happen over the pores. This has happened with both General Finishes High Performance and Old Masters Poly. I spray a bunch of test boards at a time and the hard maple, white oak, and red oak don't have these pinholes so I don't think it's technique. The final surface is glass smooth and the pinholes aren't really noticeable under normal light but are in my bright shop.

 

The walnut had a water-based dye applied then 1# coat of Zinsser SealCoat. I'm guessing the pinholes have to do with the size of the walnut pores and white and red oaks bigger ones aren't affected. Anyone else see this spraying walnut and any ideas on how to prevent it? I could try a board w/o SealCoat but then the walnut doesn't have any depth or clarity. 

I have seen those as well. If you use a pore filler you can get a glass smooth finish. It's just the grain structure of walnut, mahogany is similar. Oak and Ash pores are so huge it's not a problem.

I have thinned out water based wood filler and used that. Blow all the dust out of the grain with compressed air then squeegee in the filler in small patches at a time working at 45 degree angle to the grain. Sand it smooth, blow out the dust, inspect and fill anything you missed, repeat as needed. It can take several times to get it perfect. I only do tabletops and really visible areas due to the amount of effort involved.

  • Author

Steve - my personal preference is to keep the character of opened grained woods and not fill the pores. I might try a test board and see how it looks but hoping there is an option B. I could try a light or thinned first coat and see if helps.

Try a 2 pound cut (full strength) of Seal Coat, a coat of the product's proprietary sanding sealer, or one more coat of finish, scuffed with 400 grit before the final coat.

 

This should give you no pinholes, and a slightly filled look that still allows much of the undulations to come through.

Barry is right if you want to preserve the natural grain character. I was offering a path to a glass smooth finish, it's a lot of work but it does have an appeal in certain situations. If you seal the wood first and use a contrasting filler you can highlight the grain pattern. I saw ash dyed black then sealed and filled with a white filler and the patterns were awesome.

I think the grain pattern showing adds a texture to the surface which I like.

Try thinning the HP per mfg thinning specs. Spray a few thin coats to get the HP to soak down into the grain pockets. This will help seal the deep grain. Or as Barry mentioned, General Finishes sanding sealer should do the trick.

 

-Ace-   

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.