Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's the minimum sticker thickness for storing wood?

Featured Replies

I have a shop-built lumber rack that's full and has oozed out onto living room floor. I'm sure you can envision the results of that. The rack is used only for storing "dry" lumber brought home from the store, but of course we all know how much the definition of "dry" can vary! Right now, it's all stickered with 3/4" thick stickers because that's what I had in scrap when I first built the thing so I just kept going with it. The problem is that most of my wood is 4/4-nominal or even thinner after I've resawn it down to 1/2"-true or thinner for a project (not to mention the thin offcuts from that process). I have more air gap than lumber in some parts of the rack!

How thin can I go on stickers for wood that's supposedly already dry but mostly just needs to acclimate to the humidity in my house and shop? 1/2"? 1/4"?

I would not go thinner than 1/2" on 4/4 stock. I would only re sticker the wood that has been inside the longest with the thinner stickers. Couldn't hurt to rotate the boards from the middle of a stack out towards the top or bottom while you are restacking.

+1 rotating the boards

 

I've always used 1/2" plywood ripped into strips (left over packing / crating from shipments) and rotate the pile every month or two.. 

Shop-lumber doesn't really need all that much room to breathe compared to newly sawn boards. We use 3/8" stickers in my shop, they work fine.  

 

If you've got freshly sawn lumber, that's a different story.  We use 1" stickers at our mill for anything over 6/4, and 1/2 or 3/8" for anything 4/4.  However, at the mill we have air circ running to make up for the reduced space in the thinner stock.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.