Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Painting with spray gun

Featured Replies

I have never painted with a spray gun before. I have access to a siphon fed gun, and I will need to paint an upcoming project. Can I buy any paint off the shelf of a store in the color I need, or should I look for something specific?

Sam, this depends on the quality of your gun. Cheap Venturi units need a paint that can be thinned. Give us more detail about the setup if you can.

  • Author

You will have to be more specific. You can't just use any old gun and any old paint.  

If I want to paint the project white, and have a satin finish, can you give me an example product and preparation procedure?

 

I cant remember the exact details of the setup at home, but the gun is probably a mid range product, and the compressor is 2hp I think.

If I want to paint the project white, and have a satin finish, can you give me an example product and preparation procedure?

 

Still need more information. What are you painting? What gun are you going to be using? Do you know if it has needle sets available so that you have the right size. 

  • Author

Still need more information. What are you painting? What gun are you going to be using? Do you know if it has needle sets available so that you have the right size.

Alright, I'll try to get the info about the gun tonight if I stop by my parents house.

It is going to look like a big cabinet without doors on the front. Large 72" x 96" top. Fixed shelves, so lots of crevices to get into.

Alright, I'll try to get the info about the gun tonight if I stop by my parents house.

It is going to look like a big cabinet without doors on the front. Large 72" x 96" top. Fixed shelves, so lots of crevices to get into.

 

Get your gun info. Really can't suggest a finish until I know what the gun is capable of or if it will work at all. Im assuming you have a compressor big enough to run a conventional spray gun. 

  • Author

The compressor is a 2.5hp 21 gallon unit. Not sure if that helps. Says it can run 4.7CFM at 90psi and 5.8CFM at 40psi.

 

Here are a few pictures of the gun that I have:

B8686F1D-CF18-4A53-A78C-65C59E153A47_zps

AEAEA101-EDC3-4226-8D56-B81D9943F89B_zps

C0DB7CC6-173F-4898-B910-F3A4993F92C5_zps

Your compressor will not run that gun. But if you did spend some time cleaning it up chances are pretty good you would end up with a good gun. You will need a much larger compressor. 

  • Author

Your compressor will not run that gun. But if you did spend some time cleaning it up chances are pretty good you would end up with a good gun. You will need a much larger compressor. 

What gun would I be able to run on this compressor? Can I get a decent gun that will last me a few projects for pretty cheap? I would like to have a nice spray gun/compressor set up one day, but the truth is my budget is thin at the moment.

You need volume to run a consistent spray pattern. Also look into an inline air dryer to keep moisture out of the lines, thatll ruin your day for sure. Also tip size is a biggie, what does your gun have? I have four guns with four different fluid tips, 1.3, 1.4, 1.6 and 2.0. I use my 1.3 sata mostly now for shooting acrylic conversion coating and cab acrylic lacquer. 1.4 for urethane clears and 2.0 for high build primer fillers. I designated the 1.6 for only metallics, i dont like putting that stuff in my other guns.

What gun would I be able to run on this compressor? Can I get a decent gun that will last me a few projects for pretty cheap? I would like to have a nice spray gun/compressor set up one day, but the truth is my budget is thin at the moment.

 

You will not run a gun on a compressor that size. Some will tell you they run LVLP guns on small 30 gallon compressors for small projects by spraying and letting the compressor catch up. That is not a good way to spray nor will it provide a consistent spray. The truth is spraying is hard on a compressor. You can use a single piston unit with great results but it destroys the compressor prematurely. Your money is probably better spent on a turbine unit unless you already have a big compressor. I wouldn't spray with anything less than a twin piston compressor made for the job. No sense in destroying a perfectly good compressor.

I have a Binks model 18, and a 15 that I bought new in the early 1970s. The 18 was the top of the line Binks, and the best you could buy then.  You not only need a lot of air, but a lot of DRY air for that gun, but you could do good quality work with it.  I use an 80 gallon 5hp two-stage that I've bought when I bought those guns-just had the motor rebuilt a couple of years ago-and a refrigerated dryer.

 

I only use those guns if I'm spraying gelcoat because I don't want to put it in any of the newer guns, with the possibility of it setting up in them.

  • Author

Looks like I'll probably have to find an alternative to spraying, at least for now.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.