Bobby Slack Posted December 10, 2013 Report Posted December 10, 2013 I am not sure if everybody had the same experience. In the past I used the same type of bit from CMT, Freud, Amana and now Whiteside and it feels like Whiteside is slicing my walnut boards beautiful. Is it me? Quote
Dave's Not Here Posted December 10, 2013 Report Posted December 10, 2013 It is you....and me....and a whole lot of other people too. Whiteside makes top shelf products and, while others do too, I've never been disappointed with any Whiteside product that I've purchased. Quote
STL Woodguy Posted December 10, 2013 Report Posted December 10, 2013 Not just you, Whiteside makes great bits. More costly, but I've never been disappointed with one and have gotten far more mileage. On the topic of cost, sales can be had if patient and coupons (particularly for Woodcraft) help too. Quote
dwacker Posted December 10, 2013 Report Posted December 10, 2013 Not just you. I just needed a box core to make a simple piece of fluted moulding and tried two other name brands and the Whiteside was the only one out of the three that cut clean. Quote
Bobby Slack Posted December 10, 2013 Author Report Posted December 10, 2013 Precisely ,.. it's the clean cut what I see. Saves sanding. Not just you. I just needed a box core to make a simple piece of fluted moulding and tried two other name brands and the Whiteside was the only one out of the three that cut clean. Quote
Tom King Posted December 10, 2013 Report Posted December 10, 2013 It's been all I will buy since the 1980s. They've made custom bits for me, and modified stock ones to my specs. Really great to work with and can work with hand drawings emailed to them. They also make bits for other companies, like the better bits sold by Eagle America which cut as good, but don't have the amount of carbide on them. I was talking to them about making a custom bit for me, and they told me they already made that bit for Eagle America. On a recent restoration sash job, I thought I would have to make multiple passes, and then end up cleaning up some machine marks, but every bit in the setup cut in one pass, and even the most sticklers of Preservation people thought the surface finish was remarkable, which it was. They have fast turn around on sharpening too. Forrest and Whiteside are all I need to know about blades and bits. 1 Quote
knotscott Posted December 10, 2013 Report Posted December 10, 2013 Whitesides could very well be the best bits I own.....or maybe Infinity, but either way they are good enough that you could notice a difference over other good bits. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.