Tom King Posted December 12, 2013 Report Posted December 12, 2013 I bought the glass at a flea market for 25 bucks. It included the stop, but that was all. It was a Marvin replacement heat mirror for one that had been damaged. They sent the wrong size, and told the guy to keep it. Header was made from laminated 2x's that also became the upper part of the jamb. The building inspector said it was the strongest thing he'd ever seen in a house. The window was tall enough that there was no choice but to do it like this. You can't really tell the casing is bent looking at it straight on. The extra piece under the crown molding that's the same color as the wall is there so I could caulk all those v holes and spray the wall, then paint the bottom of the crown before it went up. Masking was done to the top of the bottom cove on the crown molding before the ceiling was sprayed. When I finish the inside of a house, all such adjoining color changes, like casings to wall, are done so a perfect edge is not dependent on masking ability. Painting goes along with the trimming out process. I've had two Architects tell me I'm the best trim carpenter they've ever seen. I just say I'm a good planner because I'm lazy. 1 Quote
TRBaker Posted December 13, 2013 Report Posted December 13, 2013 Impressive, Tom. Is that wood casing or rubber? I've used the rubber stuff in the past on arches and it is one royal PITA. Quote
Tom King Posted December 13, 2013 Author Report Posted December 13, 2013 Basswood, Bondo, and high build, sandable auto primer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.