Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rustic finish for Ash

Featured Replies

Hello Everyone,

 

I'm building a writing desk for a family member. I'm making it out of Ash. She wants it to look rustic. Which stains would be recommended to achieve a decent rustic look? Also, should I use polyurethane for a final finish or something else? It would have to be durable since it will be used quite often. Finishing is pretty much my Achilles heel in woodworking. Thanks!

 

Ryan

For staining perhaps a driftwood? Maybe try sealing with a finish coat and then glazing, then wipe away to leave some glaze only in the pore pockets.

Rustic can mean lots of different things.

 

It could mean a white wash/pickling effect life Freddie describes.  That will work well on ash because of its open grain and pores. 

Or you could go for an aged amber tone with lots of distressing. 

Or you could stain it really dark then use some steel wool to rub the stain off the corners and parts of the writing surface to make it look like the finish has worn off the most used parts of the desk.  Then cover with a top coat.

Black and other dark colored stains look good on ash because the open grain pattern shows so well. Pay attention to the grain pattern when you glue up the top . Rustic could go towards the greyish shades in my mind.

I have found that the best solution to questions like this is to ask the client to find pictures of what they like online, or in a magazine

What does fumed ash look like?

Fuming ash is generally considered a poor option because of the low tanin content. That said, I found a study that indicated fuming will work on just about anything. The caveat is that high tanin woods will darken substantially in a day or two while the lower tanin content boards took more like two or three weeks in the tent. The link is to an experiment a guy did with vinegar and steel wool.

Don't know if this is what your looking for, but here's a little doll stroller out of oak that I built for my Daughter.  The goal was for an old worn / used look (although it was brand new). 

 

I believe I sealed with 1 coat of arm-r-seal, brushed a dark glaze on with a cheap chip brush to give some streaking between light wood underneath and the dark glaze, let dry and finished with 2 more coats of arm-r-seal.  In a few spots I went over the dry glaze with a steel wool to somewhat even out the color prior to top coating and add some wear edges.

 

It's not ash, but any light colored wood should give a similar appearance.

post-6031-0-44887000-1389217393_thumb.jp

I will toss in my tiny bit of experience.

I've used iron acetate (vinegar and steel wool) on ash, and it doesn't do much, but might be what you're looking for.

Because ash has low tannins, I've also put tea on it (to try to add tannins, which kind of works) and I actually really liked the look of the tea (before I added the iron acetate). It was subtle. But the tea was brewed REALLY strong. Also, I didn't put a finish over that, so I don't know what it would look like sealed.

Don't know if that helps.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.