Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Refinishing bed frame

Featured Replies

We have a queen size pedestal bed frame that is 35 years old (see pictures attached).  There are scratches and wear on the side rails.  I would like some advice on refinishing it.  Does it need to be sanded down to the bare wood?  I believe the wood is either pine or fir.

 

Do you think that it would be cost effective to have someone refinish it?  What would be a reasonable fee to have it refinished?

 

Any comments are appreciated.

 

 

post-6734-0-02927300-1391565465_thumb.jp      post-6734-0-81450300-1391565489_thumb.jp

Yes, it'll need to be sanded down to bare wood if you want it refinished it. You'll probably want to strip it instead of sanding, much faster but more toxic. :/ I'm sure the is some nitro lacquer on there and some toner, lots if toner.

  • Author

Thanks TKF

 

That's what I was afraid of.  The turned spindles are a little intimidating.  

My vote is chemical strip allllllllllll the way down to the wood. You will be sanding your brains out and sanding spindles can be difficult. So much so, you can even change the spindle profiles. Spindles typical have the heaviest buildup of finish and spindles have a ton of  endgrain that sucks in more of the color.

 

-Ace-

Coarse steel wool is the best for spindles. A card scraper and even steel wool will work for the flat surfaces. Your best bet is looking for a gel stripper and not a liquid stripper.

Just be careful with coarse steel wool when you get down to the raw wood. It can act just like coarse sandpaper. Brass brushes work great on spindles. 

 

-Ace-

It doesn't sound like you too hip on striping and refinishing, and I don't blame you. Just a thought- you might try some dark brown past wax on one of the scratched areas and see if it makes it acceptable (It may not be perfect, but.....)  If so, you can continue on and do the hole thing in about 10 minutes.  If not, you haven't lost much. 

Although stripping and then applying a new finish will give you a beautiful result, it is definitely a big project. If you want to bring a tired, old finish back to life you could use something like an Antique Danish Oil. Circa 1850 has one that even has colour in it to match your wood and help make those scratches disappear while bringing back the finish. And it's really easy to work with - just wipe on and wipe off the excess. I would definitely recommend a good Furniture Cleaner before applying any finish if you are not going to strip the piece. Otherwise you are merely embedding the accumulation of dirt into the wood and not really getting all the benefits of the finish. Sent from my iPhone using Tapatalk

  • Author

Thanks Everyone

 

Here is a before and after of a sample using "Restor -A- Finish" 

 

A long way from perfect but will do.

 

post-6734-0-40832500-1392078254_thumb.jp      post-6734-0-10118000-1392078269_thumb.jp

For the deep scratches, borrow a trick from the cabinet installers, go and get yourself some wax crayons and a lighter. Melt the wax and push it into the gouges, Let cool and wipe down before it gets too hard. At least it will fill to the surface making it less noticeable.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.