imcmahon Posted February 18, 2014 Report Posted February 18, 2014 Here's a bit of a dissenting view... I picked this system up from Rob Cosman's videos. Waterstones are awesome, but they can be a bit of a hassle to keep flat. There's a relatively new diamond stone on the market made by Trend, it's 300 grit on one side and 1000 grit on the other. It's a solid 5/16" thick chunk of steel, and feels more solid and stable than the dmt stones to me, and it also seems to cut more quickly and load up less. It's fairly expensive, but I've had very good luck with it, and I like it MUCH better than my DMT stones. They make a 2x6" one and a 3x8" one. The 3x8" stone is the way to go if you're going to be sharpening plane irons on it. The idea is to use the 300 grit side only if you need to do some pretty heavy regrinding, like changing bevel angles. The 1000 grit side will let you flatten backs and quickly establish a flat bevel, and it'll come in much faster than using a waterstone, and with less chance of grinding a dome into your back due to an out of flat stone. Once you've got those reference faces established, switch to a high grit waterstone to polish them out. Right now I'm using a 6000 grit King stone, but I want to switch to a 16k shapton glass stone. It shouldn't take a ton of effort to polish the 1000 grit surface out. If you hone bevels on a guide like an MK2 or the cheap pinch guide, you'll see parallel lines in the bevel left by the diamond stone. Just polish on your fine finish stone until they're gone and you should be good to go! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.