David Monette Posted February 16, 2014 Report Posted February 16, 2014 Can anyone tell me where I might be able to send my chisels off to be professionally sharpened? I send my saw blades back to Forrest, but where is a good place for chisels? Quote
..Kev Posted February 16, 2014 Report Posted February 16, 2014 Is there a reason to not do it yourself? Quote
Eric. Posted February 16, 2014 Report Posted February 16, 2014 Saws are one thing...but you gotta sharpen those chisels yourself. A couple Norton double-sided stones and a honing guide can be had for cheap. Do a little research...sharpening is not as complicated as some woodworkers try to make it. Quote
David Monette Posted February 16, 2014 Author Report Posted February 16, 2014 I went to the woodcraft site and there are 10 choices for Norton sharpening stones. Being as though I have never sharpened chisels before - Someone please guide me on what one to pick. They appear to all be water lubricated. Is water preferable to oil? The brand "Norton", any particular reason...just askin...tryin to learn... Quote
Eric. Posted February 16, 2014 Report Posted February 16, 2014 I'd try to find something in the 1000/5000 ballpark, and another in the 8000/12000 ballpark, or you can stop at 8000 if you can't find a double-sided one with a higher grit than that. Doesn't have to be exactly those numbers. Quote
David Monette Posted February 16, 2014 Author Report Posted February 16, 2014 What would your recommendation be for a honing guide? Brand / type? Quote
Eric. Posted February 16, 2014 Report Posted February 16, 2014 The Veritas MKII is the Cadillac of guides but it's not cheap. LN is coming out with a new one...not sure if it's available yet or not. Have to assume it's top-notch, too. And there are a million other cheaper options. 1 Quote
David Monette Posted February 16, 2014 Author Report Posted February 16, 2014 So far in the Norton I have found 1000/4000 & 4000/8000, unless I get three single grit stones. 1000, 4000 & 8000. Quote
Andrew Pritchard Posted February 16, 2014 Report Posted February 16, 2014 For the Nortons, do you also need something flatten the stone? Quote
David Monette Posted February 16, 2014 Author Report Posted February 16, 2014 I should also get the flattening stone - I would assume that is for the stones and not the tool. Does the Veritas MKII come with instructions for beginners like myself? Quote
Tpt life Posted February 16, 2014 Report Posted February 16, 2014 Check YouTube. Most manufacturers now have some familiar face demo-ing their product there. Quote
Eric. Posted February 16, 2014 Report Posted February 16, 2014 Norton 24335 Japanese-Style Combination Waterstone 220/1000 Grit, 8-Inch by 3-Inch by 1-Inch http://www.amazon.com/Norton-Japanese-Style-Combination-Waterstone-8-Inch/dp/B0006NFDOY/ref=sr_1_2?ie=UTF8&qid=1392514475&sr=8-2&keywords=norton+1000 Norton 24336 Japanese-Style Combination Waterstone 4000/8000 Grit, 8-Inch by 3-Inch by 1-Inch http://www.amazon.com/Norton-Japanese-Style-Combination-Waterstone-8-Inch/dp/B0006NFDPI/ref=sr_1_1?ie=UTF8&qid=1392514566&sr=8-1&keywords=norton+4000 After a quick AZ search, it looks like the most economical option would be to get the 220/1000 and the 4000/8000...about $135...the Shapton Pro 8000 is about $115 alone, just for reference. You can use the 220 side to repair really bad blades. Yes, you will also need a lapping plate to flatten the stones. Yes, the MKII comes with easy instructions. Watch a few videos and you'll be on your way. I know Marc has at least one good sharpening video on the free site. There is a ton of info out there on sharpening...beware of paralysis by analysis. Quote
Tpt life Posted February 16, 2014 Report Posted February 16, 2014 Jump up a thread in the forum here and Trip-H just posted some vids worth seeing. Quote
..Kev Posted February 16, 2014 Report Posted February 16, 2014 I should also get the flattening stone - I would assume that is for the stones and not the tool. Does the Veritas MKII come with instructions for beginners like myself? Yes, it comes with instructions and is very easy to use. As Shaffer points out, that thread has some great videos in it. I think Marc did a demo of the MKII as well. It's pretty simple. Quote
David Monette Posted February 16, 2014 Author Report Posted February 16, 2014 Wow! Thanks guys! Awesome information! I can't wait to get started on some quality sharpening. Thanks again for all of the info! I will try and get pics of the chisels I have. They are not the most expensive, but I just want to get and hold a nice true and sharp edge. Quote
Andrew Pritchard Posted February 16, 2014 Report Posted February 16, 2014 Why should I get separate stones as opposed to combo stones? 1 Quote
Tom King Posted February 16, 2014 Report Posted February 16, 2014 I flatten my water stones on a granite surface plate ($35) with 100 grit Wet-or-dry sandpaper. It does a good job, fast, and the surface plate is good for other things. The one sheet of Wet-or-dry sandpaper is good for many uses. You don't have to glue it to the surface plate-just splash some water on the plate, put the paper on, put some water on top, and flatten away-rinse and repeat as often as necessary. The LN honing guide will be more expensive than the MKII, and I don't believe it has click stops to make two different microbevels quick, and easy. Quote
Tpt life Posted February 16, 2014 Report Posted February 16, 2014 Get separate for your hardest workers. Water stones wear fairly quickly. The stones tend to ship around the same thickness. This means you have half the depth of material per grit level in the double stones. Higher grit stones are not wearing lots of material away, they are just getting rid of the mill marks of the courser grits. If you have the money and the space, buy all separates. You won't have to flip your stone mid process. You can also use the next courser stone to flatten the higher grit stone reserving your DMT, surface plate, or float glass arrangement for your coursest stone. 1 Quote
Boatworks Today Posted February 16, 2014 Report Posted February 16, 2014 Tormek . This thing gets my blades so sharp I have to treat them like a loaded firearm... 1 Quote
Autorotate Posted February 16, 2014 Report Posted February 16, 2014 Here is a good video that Marc did. http://www.thewoodwhisperer.com/videos/my-sharpening-system/ Quote
Popular Post G S Haydon Posted February 16, 2014 Popular Post Report Posted February 16, 2014 Want to keep it simple? http://gshaydon.co.uk/blog/sharpening-chisel 3 Quote
Tpt life Posted February 16, 2014 Report Posted February 16, 2014 Be honest Graham. Is it simpler or does it just smell better? Quote
Trip Posted February 16, 2014 Report Posted February 16, 2014 ==> The Veritas MKII is the Cadillac of guides but it's not cheap. I’d add Richard Kell’s #1, #2 and #3 honing guides to the list – Not exactly cheap, but very well made and will last a lifetime. ==> I can't wait to get started on some quality sharpening. Most folks don’t quite put it like that… For many, sharpening closely aligned with visiting the Dentist There is no ‘perfect’ approach to sharpening and every system has pros/cons. Before you select a system and jump-in with both feet, you may want to spend some time on YouTube surveying the systems available. A better approach would be to attend a sharpening class offered at the local Woodcraft, Rockler, etc. Another idea would be to reach-out to your local woodworking club/association and see if you can get your hands on some of the kit… Here are some clubs/associations in the Wisconsin area: Madison Woodworkers Guild 6014 Gateway Green Madison, WI 53716 Contact: Steve First Phone: 608-222-7581 Email: madwoodworkers@yahoogroups.com Website: groups.yahoo.com/group/madwoodworkers Northeastern Wisconsin Woodworkers Guild 846 Cornelius Drive Green Bay, WI 54311 Website: www.newwg.org Wisconsin Woodworkers Guild PO Box 137 Milwaukee, WI 53201 Website: www.wiscwoodworkersguild.org There's a list of sharpening systems in this thread: -- It's a crowded space. Take a step back and select a system that best fits your needs and budget... Again, if you can get your hands on some kit, you'll be a more informed consumer... Good luck Quote
David Monette Posted February 18, 2014 Author Report Posted February 18, 2014 Thanks for all the input guys! Still researching, reading, looking at videos. Maybe when I get all the stuff I need, I will make another post with pics. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.