Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Reclaimed Wood Base for Butcher Block

Featured Replies

Hi All I've poked around the site a bit trying to find an answer to my question but no luck (may be more of a taste thing). I am in the process of building a butcher block workstation out of hard maple for the block and reclaimed walnut for the base. I've done some wire brushing and light sanding to the walnut but I'm not quite sure how I should finish it? I'm going to be using Watco butcher block oil for the top but I need suggestions for the base? I don't want to alter the color of the natural wood but I do wan't to protect it. I don't have the ability to spray a finish so I will have to wipe or brush it on. I appreciate any and all suggestions.

Thanks,

General Finishes Arm-R-Seal always looks good on walnut.

  • Author

Do you have a picture of the walnut?  Reclaimed can mean lots of things.... if you have old finish on it, or lots of checks and cracks, or a rough sawn surface, etc, those can all dictate which approach might be better.  

Here are a couple of shots of the lumber semi cleaned up.

photo_1.jpg

photo_2.jpg

  • Author

are you going to leave it rough or plane it all smooth?

Leave it rough. Just some sanding.
  • Author

In that case I would just use boiled linseed oil and wax. Use a dark wax so that it does not dry white. If you don't have/can't find dark wax, you can make your own by mixing a little dark oil based stain with a commercial paste wax.

Thanks I'll give it a shot on some scrap.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.