Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jointers: Delta 37-380 or a Powermatic 60A?

Featured Replies

Both are of similar age and appear to be in very good condition. Asking $900 for the Powermatic and $750 for the Delta.

Please discuss the pros and cons of these machines compared to each other, if you would be so kind.

 

I doubt I have much time to decide.

 

Cheers!

 

Delta support over the past 3-4 years has been such a train wreck I would be leery of buying any Delta equipment of the last 10-15 years.

I agree with Arminius - I have a Delta planner for which I was unable to get replacement blades for almost two years.  

Wow, good finds.  Where did you find them and about how old are they?

I haven't seen a decent PM jointer on Craigslist for some time now.

 

Look at you, you have two to pick from.  

Blades would not be my concern - the Delta is likely to be essentially unsupported, I'd sooner buy a 30 year old one than a 10 year old one, particularly because it would be better made.  If anything fails on a Delta now, you are into the vintage market for parts, and that can erase the $150 difference very quickly.  Granted, a jointer is a fundamentally simple machine.

I'd choose the PM, maybe try to negotiate a bit...

 

I LOVE my DJ-20, but I've never been overly impressed with the Delta "Professional" jointer.  I might buy the Delta if it were significantly cheaper.   I've seen several of these sell here in CT for $5-600, in excellent shape. 

 

The parts that might need replacing, like belts, switches, motors, blades, start caps...  are all off the shelf items.

Isn't delta like PM in that all the wearing parts are local available source? The bearings  can be had at any bearing supply house. The knives are standard and the motor non proprietary.

The Delta has a mobile base, and a dispoz-a-blade setup.

Anyone had experience with the Disposablade?

 

I would not get any machine with disposable blades. Good HSS and carbide are the way to go and much less head ache.

  • Author

I couldn't get the guy to budge on price for the Powermatc, so I scooped the Delta for $650. It was owned by a guy who runs a machine shop. He used it to make boxes for his products - airplane parts for Alaska bush planes. The guy took very good care of it and it was setup by a machinist...perfectly. He even had a forklift and set it nicely in my truck. It took four burly dudes to get it safely to the ground.

Ok...let's see if I can make some flat, square boards. I need to be able to do that if I'm going to make a 7' x 3' x 2" table.

  • Author

Also, I don't have to use the dispoz-a-blade they come right out. However, they do seem to cut quite nicely and are double edged. They are German made blades. I'll see how it goes, but I can always switch back to regular blades, or save up for a HSS upgrade. Thanks for all the input.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.