rodger. Posted March 29, 2014 Report Posted March 29, 2014 Any opinions on this blade? I will get the thin kerf version (if there is one) if I decide to go with the blade. Quote
knotscott Posted March 29, 2014 Report Posted March 29, 2014 The Fusion and the very similar Infinity Super General are unique among 40T general purpose (GP) blades in that they have a Hi-ATB grind and a dual side grind. The result is an extremely clean cutting blade that excels at fine crosscuts and plywood. They'll also rip extraordinarily cleanly, but fall a bit short in very thick rips much over 1-1/2" because the characteristics that give the edges such a high polish also make it a tad more prone to burning in thicker ripping. If a GP or combo blade suits your needs, you won't find a cleaner cutting example. There is a 3/32" thin kerf version. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.