Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

darkness along the joints

Featured Replies

I built a cabinet out of RO ply. The shelves are dado-ed. 

 

I was doing some stain matching to existing store bought furniture - what a nightmare that was. I had to apply two stains and coat of amber shellac to get the color even close, but it is close enough.

 

Anyway, I'm putting on the wipe-on-poly and suddenly there are dark bands about 1/2" wide around the shelves/dadoes. I did not see them before the poly went on, now they are quite noticeable. They must have been there before the poly, but can't say for sure. I've seen this before and it seems it happens by wiping stain cross grain along joints. I tried not to do that, but who knows what happens after an hour of huffing chemicals.

 

So, any recommendations for fixing? Do I need to sand the areas down and start over?

 

I probably just answered my own questions, but does someone know some voodoo trick?

With slow drying stain, I have had stain weep back out of the crack of the joint keeping the stain wet near the joint and over darkening the path alongside it. Possible cause but not a solution.

I have had luck removing finish and stain blotches with lacquer thinner and a bunch of rags . Do it in a well ventilated area. Let it dry , touch up if you rub too much stain off and you should be back on track.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.