Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Maple Island Countertop

Featured Replies

I'm a beginner and my first project is a maple edge grain island countertop. I'm looking for some direction as I complete "her" with the finish.

1. After my final sand with 220, I really like the natural look and don't think I want to stain it dark or possibly at all. I want it darker than it is which I assume the Arm R Seal will do. However, any direction on how to pull out the natural beauty of this maple without getting it too dark or too light? Would a Linseed oil be appropriate?

2. Secondly, as this is a countertop, does anybody have a special precautions related to food safety and the finish?

Appreciate the community of learn eras and sharers on the forum!

Greg

I say stain on a butcher block that you plan on using is a no go. I wouldn't even use arm-r-seal. You need a food safe finish like salad bowl finish. But you don't want to build a film if your using it to cut stuff on. I would for 50/50 salad bowl finish and mineral oil or even 25/75 salad bowl and mineral oil. The idea is you are thinning out the varnish so it can soak into the wood and not build on top.

I recently did a maple kitchen island top and finished it with salad bowl finish.  Here's what it looks like.

 

r8fjt.jpg

  • Author

Thank you for the reply's. I won't be cutting on it but food safe is a high priority. Sounds like Salad Bowl is the way to go. If I wanted to go slightly darker than that (pic above), what's the best route?

Greg

Try a few hours of sunshine, or maybe a tanning bed. Many light colored woods will darken with UV exposure. If that doesn't do it, try the videgar & steel wool treatment. Since maple has a low tanin content, the result should be subtle. Try a test piece, and wait a couple of days before finishing it. The acid & iron treatment takes some time to bring out the color in very light woods, and sealing over it seems to stop the process.

  • Author

Tanning bed huh? Learn something new everyday! I'm assuming the exposure to sunshine is prior to any type of finish?

Yes, expose the raw wood to UV rays. Light woods tend to darken a bit, dark woods tend to lighten. Cherry is a good example. Light pink when newly cut, it turns a rich dark red-brown over time. Exposure to direct sunlight shortens that time considerably. In fact, cherry is one wood that reacts intensly enough to light that you can make "sun tan tattoos" on it with a stencil!

Like with any other finishing technique, try it with scrap first!

I have been happy with Watco 's salad bowl and cutting board finish. If you read up on any of these they are careful to say the cured finish is food contact safe.

Since this isn't going to be a cutting board and just used as a counter top I don't see any problem with using a stain (other than maples natural tendency to blotch) . I also think I would want a really durable finish that will stand up to repeated washing. As a professional I would use a conversion varnish or 2k Urethane as a home hobbyist I would use an oil based polyurethane or a water based floor finish like Bona Traffic.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.