kep1019 Posted October 21, 2010 Report Posted October 21, 2010 Does or has anyone on this site us a Shopsmith in their shop. I'm still looking for a table saw and just remembered these machines. Could potentially save a lot of space. Looking forward to the imput. Keith Quote
kentuckybill Posted October 21, 2010 Report Posted October 21, 2010 Keith I dont own one now but have had several in the past. I like them for what they are. I did not like the table saw function even with the 510 upgraded table. It is too high and unsafe for me. I did like the lathe function and the bandsaw was very well built. Having said that I would not hesitate to have another one if my space were limited in size. I find I don't use my tablesaw as much as I thought I would when I upgraded equipment. You can find them used and in need of some repair for very little money. They are not hard to refurbish and parts are redily available. I would go that direction and if you find you dont like it you can sell it for a profit. Hope this helps.. Bill Quote
jwatson Posted October 22, 2010 Report Posted October 22, 2010 i have an old ER model from 1949. I have used the TS and I do like one thing is that its quieter than my delta TS. though bill is right about the safety concerns. If you got one with a bandsaw and got a mitersaw you could probably get away with not having a ts at all depending on how you develop your work. Quote
bepilot757 Posted October 24, 2010 Report Posted October 24, 2010 Keith I have a Shopsmith I use extensively. I purchased it used in 1994 as a model 500. It was built in 1987. I have upgraded it to a model 510 but found it still lacked the repeatable precision I wanted. The Incra fence and crosscut sled have given me the accuracy I was looking for. I recently added the PowerPro unit to the headstock. This replaced the original AC motor with a larger (2.2hp) DC motor and digital control system. This has been a very worthwhile addition. The unit is now can provide continuously variable speeds from 250 rpm to 10,000 rpm for various accessories. I use it to power the table saw, bandsaw, joiner, belt sander, disc sander, oscillating sander, lathe and overarm router. There are more accessories it will operate, but those are the ones I use normally. The change over from various machines is not all that time consuming and it saves me space I do not have to accommodate all the individual machines if I owned them. My shop is 12 x 30. I have my 4 benches, a free standing joiner, planer, miter saw, dust collection unit and a radial arm saw in the shop. Were I to start over again I would still have the Shopsmith as my table saw if my shop size is a limitation. Quote
rkh2 Posted October 25, 2010 Report Posted October 25, 2010 Keith - I have a Mark V 520 which I purchased in 1993. It was a 510 and I since upgraded to a 520 which has a much better fence in my opinion. I only have a small shop and couldn't be more satisfied with it. I have built many projects from small toys to a twin bed for my grandson and use it for wood turning from pens to bowls and lots in between. Still runs as good as it did new and the support from Shopsmith is second to none. Now there is a PowerPro upgrade available which makes for it to be even a more superb tool. I have the special purpose tools which it powers as well, such as the bandsaw, belt sander and joiner. Also have what they call a universal tool rest system which makes turning really nice. Besides my Shopsmith, the only other large tools I have are a DeWalt Double Compound Miter Saw that I got a really good deal on and a DeWalt Planner. The Shopsmith will cut anything my miter saw will and the only reason I have the miter saw was because of the deal. I highly recommend a Shopsmith for anyone that does not have the luxury of a large shop. If you check out the Shopsmith forum, you will find much more about it. Also, the Shopsmith is still made in the USA!! Quote
jwatson Posted October 25, 2010 Report Posted October 25, 2010 going to add this to the discussion http://www.builtwithashopsmith.blogspot.com/ neat site. also if you happen across a shopsmith without a guard below the saw table you can either make one or a guy online sells one to put around the blade. Quote
sj2494 Posted November 6, 2010 Report Posted November 6, 2010 my uncle has one and his has been replaced with all individual tools shop smith is good to start but not fun to use as a tool that is ready to go no swapping this for that Quote
likeke511 Posted February 28, 2012 Report Posted February 28, 2012 I have an old ER that I inherited from my uncle. I used the TS before I bought a stand alone TS. I didn't much care for it. Mine is mainly used as a drill press and lathe. The other thing I didn't really like was the extra time it took to change it from one tool to another. I get very limited shop time so I'd rather not spend it fiddling with the setup every time I need to do a different operation. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.