Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Suggestions

Featured Replies

Arm-R-Seal.  Big believer in oil based finishes for dark woods (brings out the color and tone) versus water based.  Light colored wood is just the opposite (water based helps to prevent the all too common yellowing effect as they mostly cure water clear)..  In your project I think the yellow-ish tint on the maple would look very nice against the dark paduak.  Just my opinion :)

Here's the simple schedule:

 

Single coat of drying oil to bring-up the figure (SW Tung, Seal-a-Cell, et al). I happen to like the slight warmth a single light coat of a drying oil has on Tiger, but I agree with BW, that you shouldn't go hog wild -- too much oil would go very yellow over time...

 

If it's strictly a decorative piece, you can go with shellac and/or solvent-based nitrocellulose lacquer. It's always tempting to slather-on a few coats of Arm-R-Seal, but two years down the line, you might not like the way the Tiger looks. If you want to go WB, look at some of the GF topcoats...

 

-----

 

Now, let's take a look at another approach that would leave the box with a completely different look ---  this would be my schedule:

 

Single coat of whatever drying oil I've got open at the moment -- Seal-a-Cell, Sutherland Welles Polymerized TO Sealer, Formby's, whatever. Doesn't really much matter -- just looking to get a bit of warmth and depth... The only criteria is that it not have much body (not Arm-R-Seal, et al) and it's a drying oil, none of that BLO nonsense.

 

Wait a couple hours, very lightly scuff and shoot a medium-wet coat of #1ct Super Blonde to lock everything in -- I've always got some in a gun ready to go. The alcohol carries the oil deeper into the wood to enhance depth and chatoyance... While a minor step, it makes a huge difference...

 

Wait one hr, shoot another coat of #1.5ct SB to get some solids onto the wood (we need something to level).

 

Since it's a decorative piece, I'd fill the pores with AquaCoat (optional, depending on how I'm feeling at the moment).

 

Wait a couple hrs, scuff w/ 320 -- none of that Scotch Bright crap, but a proper sanding pad -- Norton, Rhyno, etc...

 

Shoot a light coat of #1ct SB to lock it in.

 

Let stand overnight.

 

Shoot a wet topcoat from whatever gun happens to be loaded -- I'm shooting a #80 WB pre-cat lacquer this week, so that's what I'd use...

 

Wait at least eight hrs, and scuff w/ 320.

 

If I want a high-gloss, I'd shoot another wet coat, then rub-out w/ Abralon to #4000.

 

If not, I'd shoot a light coat of NS lacquer.

First thing I'd do is get rid of all that tearout. :)

 

Then I'd squirt some sh'lac on it.  Or Andy's Arm-R-Seal, or Trip's head-spinning schedule. :D

 

Lately I've been enjoying rubbing Tried & True on small projects that don't need much protection.  I just do two coats and call 'er done.  Very natural look and feel.  I haven't used it on maple yet, though, so I don't know how bad the yellowing is.  And it ain't cheap.  But I like it.

+1 on smoothing out the tearout before you finish. I like to keep my maple light, white and bright so I would lean towards a water based finish. And if you can find one with some UV inhibitors it will slow down the maple and paduak from darkening .

The best thing to do is test finishes on some scraps.

If you like the amber tones from an oil base I like to use Watco Danish oil. Just follow the directions on the can and put the rags outside to dry .

  • Author

Yea guys I'm fixing the tear out don't worry lol I had just got to the point where it could be seen to start getting some opinions. I had for sure thought arm r seal any thought on spray lacquer possibly??

Sent from my iPhone using Tapatalk

Spray lacquer is not going to add much amber either. Should be a fine finish for a box.

Seriously, do some tests on scraps ! Prep the scrap the same way you do the box.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.