Recommended Posts

Posted

I live in the south east and humidity is killing my cast iron top. Other than cost, why would a stainless steel table saw top not be a good idea? Has any one ever made a top out of stainless steel?

Posted

John Heisz experimented with one on his custom table saw, but decided it wasn't flat enough and created a concrete one instead.  

 

If you want to retain conventional functionality then you probably want to consider how you'll handle creating the miter slots.  John had a decent idea of omitting the slot and having a sliding table instead. His custom saw is nice and all, but in your case it seems like a lot of work to avoid some rust.

 

https://woodgears.ca/reader/homemade_tablesaw.html

http://www.ibuildit.ca/table-saw-1.html

Posted

I live in Atlanta . Occasionally cleaning and waxing my saws has done the trick for over 30 years. My main tablesaw sits 16 ft from a garage door that is wide open all day 3 seasons of the year.

Scrub it down with an abrasive pad, rub on some paste wax, let it dry, buff vigorously . Usually less than once a year.

If you could afford a stainless saw top it wouldn't hold magnetic accessories very well. Stainless is hard to machine and has less strength, so it could stress crack from years of vibrations a saw will produce.

Posted

==>why would a stainless steel table saw top not be a good idea?

Cost is the first thing that comes to mind... I'm sure there are others, but you'd have to get past cost...

 

==>I live in the south east and humidity is killing my cast iron top

There are several threads on rust management... Unless you definition of 'South East' roughly translates to 'Tropical Rainforest', something should work for you...

 

What have you tried?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 58 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined