Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pot Metal or Aluminum Nails

Featured Replies

Another left over from my previous job was a wand type metal detector. Tonight I was working on a very old board and used it to find all the nails in the board. I removed them and then used my saw to cut a number of 1/8" cuts to make a  1-1/8" by 3/4" notch into the board. Upon clearing the remaining material out I found that I had cut through 2 nails. My first thought was that the batteries needed charging in the wand. I put a nail onto the plywood table that I am using to assemble the mobile base  and stacked 2 then 4 2x4 cut offs onto it. The "eeeeeeeEEEEEE" sound confirmed that it was working correctly. I went back over to the board. Nothing. I dug out the remaining bits of the nail. They appear to be either pot metal or aluminum. I had never seen a non-ferrous metal nail before. I could bend and break it with my hands. I inspected my WW2 blade and found not a mark on it. I even used my phone to enlarge the teeth by 4x. 

 

Have you dealt with a nail like this? Should I remove my blade and have the profession sharper have a look at it?

For attaching aluminum to materials you want to use a nail of the same material.  Otherwise you will set up say your aluminum flashing as a sacrificial anode not a good idea.

 

This was how they put copper on wooden naval ships.  It would fall off with iron nails as the copper made the iron corrode faster, but when they used copper nails it worked.

Probably a roofing nail. They are pretty common and usually come with a rubber gasket around the top. Used for putting up aluminum roofs. If you can't see anything different with your blade and it is tracking true then you are fine. I would not use anymore of that lumber though. Its not worth the hassle.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.