tcarswell Posted November 26, 2014 Report Posted November 26, 2014 I have a dewalt 12.5 lunchbox planer I believe it's a dw733 type 1 Anyways I just went through two pairs of powertec knives from amazon in a year. I am very careful of feed direction I take light passes and I never ever put any thing through that's ever had nails in it. If I had to estimate I'd say each pair of knives lasted for about 120 feet of rough sawn lumber. I also use an air gun on anything rough sawn to dust it off and make sure there isn't any dirt dust etc to blunt the knives. So the powertec knives are cheap. Aside from a helical head what are my options as far as better knives ? Quote
TerryMcK Posted November 26, 2014 Report Posted November 26, 2014 I don't have the Dewalt but I have used this make of blades http://www.axminster.co.uk/resharpenable-hss-planer-knives-for-dewalt-dw733 and they definitely have lasted a lot longer than 120 feet. It doesn't sound a lot of board length to me. The ones I've linked are HSS and you can hone them yourself. I changed over to tungsten carbide and they are real good and last way, way longer than HSS. You may be able to get the equivalent locally in CA Quote
RichardA Posted November 26, 2014 Report Posted November 26, 2014 I have a dewalt 12.5 lunchbox planer I believe it's a dw733 type 1 Anyways I just went through two pairs of powertec knives from amazon in a year. I am very careful of feed direction I take light passes and I never ever put any thing through that's ever had nails in it. If I had to estimate I'd say each pair of knives lasted for about 120 feet of rough sawn lumber. I also use an air gun on anything rough sawn to dust it off and make sure there isn't any dirt dust etc to blunt the knives. So the powertec knives are cheap. Aside from a helical head what are my options as far as better knives ? I have a Dewalt 735.... I bought some HSS blades from Infinity, they are a hell of a lot better than powertec or OEM blades, which are hard to tell apart. The only downside I could find is the cost, nearly $80... They also make a carbide blade, that sell's for several hundred! Quote
dwacker Posted November 26, 2014 Report Posted November 26, 2014 120ft is not much but considering you are making multiple passes its really more than you think. HSS dulls quickly and cheap HSS even quicker. You will get more out of carbides but will not get as clean of cut as sharp HSS. You just have to do some math and weigh out the cost of better HSS vs cheap. Quote
tcarswell Posted November 26, 2014 Author Report Posted November 26, 2014 Ok . Thank you very much guys I'm gonna give better quality hss blades a try. Quote
tcarswell Posted November 27, 2014 Author Report Posted November 27, 2014 I just saw the Grizzly helical and byrd cutterhead in the new grizzly Christmas catalog. I thought helical Heads were twice as much. Are these decent brands ?! Quote
jg9522 Posted December 22, 2014 Report Posted December 22, 2014 I just purchased Infinity 8" jointer knives and I definitely would NOT reccomend Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.