Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

shop mats

Featured Replies

I am using horse stall mats for anti-fatigue mats. They are 4x6 foot. I want to screw them to the wood subfloor. Any suggestions on what type of screws to use?

Why bother? I have a horse mat in front of my tablesaw on a very smooth concrete slab and it doesn't budge. Or considering the thickness of a horse mat put a piece of quarter round or beveled trim around it. You can nail that to the wood floor and make it easier to roll a cart over the mat.

Rubber is no fun to drill. I imagine a screw could pull through . I would use a washer headed screw to spread its grip on the surface if I ha to screw it down. Double face tape might work well too.

If you insist on screwing I recommend the fastening systems used for pitched foam board under rubber roll roofing. They use large washers to keep the head from ripping right through the foam.

  • Author

Hmmm. I did a search on Google. And couldn't find a like for what your talking about. I was thinking a 2 inch kreg screw with a pax washer.

  • Author

I have them covering all if the shop floor and done want them creating small crack that saw dust will get into.

are you having a problem with them moving or getting debris under them? I'm thinking a bead of clear silicone and spax screws. with the fiber reinforcement in the mats I can't imagine the screws pulling through, but I think this is what he was speaking of

 

 

post-16388-0-02394400-1417302218_thumb.j

http://catalog.anchorsunlimited.com/category/roofing-fasteners-2

This site calls them stress plates. I am of the camp that does not think they need to be fastened but I do not think there is a middle ground. Once you fasten in a single spot then any ripple as you move stuff runs the risk of tearing the rubber. You also want to be sure to use a large enough washer that you never lose the screw head due to it pulling below the surface.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.