Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Money to burn

Featured Replies

I think you hit the nail on the head. Your sander doesn't see much use. There is a difference in how production shops work. Hobby folks see drum sander as a luxury used to sand wider pieces. Production guys for the most part don't even call it a sander its a abrasive planer. All lumber in production shops go through the machine for final thicknessing and surface prep. Even plain wide belts are a thing of the past now days planers and wide belts are a single machine. Hobby drum sanders are micro sized versions of abrasive planers that most stopped using decades ago. This is really nothing new but all of it is irrelevant to the topic and the forum Itself for that matter.

 

Exactly.  It's another apples and oranges debate.  If we're talking about a hobby shop, a drum sander is a perfectly adequate tool if its used appropriately for its intended purposes and it's not a piece of junk.

I think folks have to take some things with a grain of salt and think about the source. I don't think CM was bashing the performax but gave his opinion based on experience. Most will never get to experience a better machine and the smaller units get the job done for hobby folks. It hard for guys with experience with both to be as in love with a hobby machine as hobby folks that have never seen what a better machine will do.

  • Popular Post

Would I get mad ladies if I had a Mercedes?

I drive a Mercedes and I can say from experice NO. Ugly is ugly no matter what you drive. :)

I used to drive a crappy beater. Mad ladies. Either you got it out you don't ;)

I had not given much thought to a drum sander either until I saw one is action when I recently visited Kev's shop. I could see a lot of uses for a drum sander, especially if your a making end grain cutting boards. I would take a drum sander over a Domino any day! Eric had a good point about the bandsaw. I would probably go with a bandsaw before a drum sander. 

  • Author

Idk, now you guys have me wondering if I should spend the money on upgrading my ride!

James, domino never really crossed my mind. I'm not making mortise and tenon joints all day every day. Nifty tool, but router and chisel works for me at the moment. So far, the only curve I have wanted to cut was the chop for my leg vise. I had to make do with a borrowed jigsaw, and lots of sanding. I would almost choose a new jointer over the bandsaw. It might be lame, but I find jointing to be a very satisfying process. Also, I feel like if you don't begin with well jointed lumber, the rest of the process for your project suffers. The drum sander was purely to speed up cutting board and countertop production. I have two 24x36 restaurant work stations in clamps on my bench right now, and I would love to have a better and easier way to sand them. I wish my local craigslist would provide me with something worth buying in the form of a high quality jointer/bandsaw/drum sander. Hopefully a little bit of patience, and if I come up with another $400 in business, I will end up going for the supermax. I would rather have the cash in hand, than outlay the money hoping to make it back. Fingers crossed I get a few more Christmas shoppers. Although, I actually prefer the commercial orders more.

Bandsaw does way more than cut curves.  It's hard to appreciate just how versatile a machine it is until you own one.  But obviously it's your choice, and if you need a drum sander, go getcha a drum sander.  I personally couldn't fathom that order of purchases for my own work, but I am not you and you are not me. :)

Another vote for a band saw. I couldn't imagine my shop without one. Hell, I want another one. Bandsaw excels at ripping rough stock. It is often the first step I take in any project. Absolutely essential for the way I work.

Idk, now you guys have me wondering if I should spend the money on upgrading my ride!

James, domino never really crossed my mind. I'm not making mortise and tenon joints all day every day. Nifty tool, but router and chisel works for me at the moment. So far, the only curve I have wanted to cut was the chop for my leg vise. I had to make do with a borrowed jigsaw, and lots of sanding. I would almost choose a new jointer over the bandsaw. It might be lame, but I find jointing to be a very satisfying process. Also, I feel like if you don't begin with well jointed lumber, the rest of the process for your project suffers. The drum sander was purely to speed up cutting board and countertop production. I have two 24x36 restaurant work stations in clamps on my bench right now, and I would love to have a better and easier way to sand them. I wish my local craigslist would provide me with something worth buying in the form of a high quality jointer/bandsaw/drum sander. Hopefully a little bit of patience, and if I come up with another $400 in business, I will end up going for the supermax. I would rather have the cash in hand, than outlay the money hoping to make it back. Fingers crossed I get a few more Christmas shoppers. Although, I actually prefer the commercial orders more.

This seems like a no-brainer to me, get the drum sander. I think it makes the most sense for the type of woodworking you are doing right now. Then buy a bandsaw with money you make form sales. 

  • Author

Yeah, that's part of the problem, I only used a bandsaw a few times in the architecture woodshop. Truly, I don't know its potential either. I do know that a 14" looks like it would be similar to my 6" jointer experience--immediate disappointment in size and capability. Next step up is the 17"ers and those are getting real close to the drum sander in price. Let's be honest, me on the verge of sanding end grain for hours has my judgement skewed a bit. I am hoping to have all these things in the next few months, just a matter of which comes first.

unanimous vote on the supermax 19-38? Seems like paper changing, automatic feed rate, rigidity of the cantilevered structure, and they make it seem like sanding things over 19" wide is pretty easy and accurate with the flip of that switch.

Some questions I have for you, are you doing mostly large type wooden countertops? How many a week are you doing? On average ,how big is each one? What kind of power do you have in your shop? (220 single phase, 220 3 phase, 110 house type only, 440 3 phase, etc.) How much do you want to invest or just spend what you can right now? Those questions will guide you towards what kind of equipment you can afford and actually install in your shop. I have had equipment I have wanted to purchase only to find out that the power requirements weren't even close to what I could run, 50 HP motor on a 100 amp service just doesn't work! Dustin

  • Author

Some questions I have for you, are you doing mostly large type wooden countertops? How many a week are you doing? On average ,how big is each one? What kind of power do you have in your shop? (220 single phase, 220 3 phase, 110 house type only, 440 3 phase, etc.) How much do you want to invest or just spend what you can right now? Those questions will guide you towards what kind of equipment you can afford and actually install in your shop. I have had equipment I have wanted to purchase only to find out that the power requirements weren't even close to what I could run, 50 HP motor on a 100 amp service just doesn't work! Dustin

Sweet baby Jesus, 50hp!?!?! Dustin, I think all my tools combined equal 10HP, so no, nothing that extreme. I run everything(cept the lights) on a 60amp subpanel. Plenty of slots left for me to install additional breakers, but right now I have a dedicated 20amp 110v line that I plug my table saw, jointer, and planer into, a dedicated 30amp 220v line for my cyclone, and then a dedicated 20amp 110v line for my air cleaner. I would prefer the sander to be 220v, but it looks like the supermax series is 110v.

 

My workload is really hit or miss. 3 weeks ago was nothing in terms of countertops/cutting boards, now I have 12 to make. Sizes vary, but 18"-36" is typical widths and lengths. Im always busy with coat racks and shelves though. I never planned to turn this into a profession of any kind, its just something fun in the evenings and weekends to come home from the office job and churn through some wood. It is also giving me the liberty to spend a healthy amount on tools. Well, I should qualify that "healthy" is a relative term for a 26 year old up to his eyeballs in student loans : )   To me, this tool seems like an instantaneous profit margin increase/time saver. Two birds with one stone in both those categories gets me excited.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.