bernieswanson Posted January 1, 2015 Report Posted January 1, 2015 My thrust bearings are shot. I have been using ceramic guide blocks. Should I go with OEM bearing or is the Carter conversion kit at $179 worth the $$$? I lust after a larger saw, but spending $200 to upgrade this vs $1400 for new seems reasonable. What do folks think of all ball bearing guides (back and sides)? Quote
wdwerker Posted January 1, 2015 Report Posted January 1, 2015 I put a Carter ball bearing set on my old 14" Delta/Rockwell w a height kit and it made it behave better than it ever had before. New tension spring and a extended tension handle made the upgrade complete. Much easier to adjust to different blade sizes now. Quote
bernieswanson Posted January 1, 2015 Author Report Posted January 1, 2015 I don't have a riser kit. Is that why you needed a new spring? I'm going to look at a Laguna or Jet or Grizzly upgrade and may consider selling mine before I make a decision. Being able to re saw 12 inches is tempting. My cuz just got a bandsaw mill (wood mizer) so I may get some deals on wood. Quote
wdwerker Posted January 1, 2015 Report Posted January 1, 2015 My saw was built 30 years ago ! New spring has much better action. Height kit comes in handy a few times a year, did that long before any other upgrades. One had no relation to the other change. Quote
Coop Posted January 1, 2015 Report Posted January 1, 2015 My Grizz has the orig bearings and they work great. Never tried the Carter. Mine has the riser and I used it yesterday to re saw a 10"x32" piece of cherry and was pleased. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.