Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Gift Exchange Box (Project #2)

Featured Replies

I made this box for our White Elephant exchange at church. 

 

A lot of first in this one.  First ever box joints, first inlay, first time filling grain (thanks to TWW), and first time to face glue dissimilar woods.  Of course it's far from  perfect, but I also learned not to point out mistakes.  Of course now I have request for several more boxes.  It was tons of fun to build and  the Lady who received it was sooooo happy.  That's why I work the wood. 

20150105154219_project2-2.jpg

 

20150105154204_project2-1.jpg

 

20150105154237_project2-3.jpg

  • Author

I also need to add a big Thank You to all who contribute to this site.  Without your input I would never have been able to get this one to look good.

looks good how did you cut out the cross in the lid? looks realy tight

Beautiful box. I like the way the liner wood ended up in your box joints. I've never knowingly seen that. You obviously laminated the light and dark woods together prior to cutting the box joints? 

  • Author

looks good how did you cut out the cross in the lid? looks realy tight

I used the video that Mark has on doing inlay.  Made my cross, layed it out with an exacto-knife, used a router to cut out all but a few thousands and used a chisel for the remaining bit.  It's not as tight as it looks, there is a hairline of grain filler on the lower left.  However, I'm not telling anyone it's there.

 

I really liked getting the Smooth High Gloss finish.  I bet I filled the grain at least 6 times.  I had always wondered how people did that, tedious but enjoyable. 

 

I should add that I also learned how to resaw with a table saw.  The only stock I had available was 3/4"  I needed 1/2" for the walnut and 1/4" for the Maple.  Bought a Freud rip blade that cuts like butter.  Left the blade just below half and flipped each piece.  Hand saw the remainder.  It was safe and effective.

  • Author

Beautiful box. I like the way the liner wood ended up in your box joints. I've never knowingly seen that. You obviously laminated the light and dark woods together prior to cutting the box joints? 

Yes.  I would love to take credit for the idea but saw a similar design on lumberjocks.  (Can I say that here?)  The woods are walnut and maple.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.