wouldwurker Posted January 13, 2015 Report Posted January 13, 2015 Hell, in that case you can have my Delta contractor saw gratis if you're willing to come pick it up in GA. Quote
Russell Beeman Posted January 13, 2015 Author Report Posted January 13, 2015 Hell, in that case you can have my Delta contractor saw gratis if you're willing to come pick it up in GA. I'll be there in the fall as long as everything goes as planned. Also, I'm not too worried about hauling stuff across country because the military pays for my moves. Quote
Russell Beeman Posted January 15, 2015 Author Report Posted January 15, 2015 Okay guys, I was going to buy a set of 25 router bits from a guy while I was in San Francisco on Sunday, but I just found out the guy sold them out from under me, which I know I should have expected, but its still frustrating. So, the router I am going to buy has a 1/2 collet and I have found another set of 23 but they are 1/4 shank... should I just get a 1/4 collet or should I just bite the bullet and buy a new set. I just planned on getting a set because I don't know which ones are the essential bits and assumed a set would have the good ones in it. Quote
..Kev Posted January 16, 2015 Report Posted January 16, 2015 Having both collets for your router is handy. Quote
Raefco Posted January 16, 2015 Report Posted January 16, 2015 you will need both at some point, i have a couple sets in various bit set boxes and hanging above the router table Quote
Russell Beeman Posted January 16, 2015 Author Report Posted January 16, 2015 Okay, so I am thinking of getting either this set http://amzn.com/B000FJRN8S or this set http://amzn.com/B000X47YDE Will these be okay to start? I have been looking at the Freud bit sets and they look really fancy, but I just can't spend $200 on a router bit set yet, eventually, but not yet. If these aren't worth buying, should I get one or two really nice bits that would be good all around? I am very interested in making mortise and tenon joints so I know I will need an up cut spiral bit and I will probably buy a nice bit for that, but I want to really screw up a few pieces of wood first with a regular bit getting used to the router. Quote
Raefco Posted January 16, 2015 Report Posted January 16, 2015 Many here will frown on the thought, but, I own a couple sets of harbor freight bit and the have done a pretty good job for several years, I have started adding better bits to the collection but I still use those regular, just make sure what ever you get has carbide cutters Quote
knotscott Posted January 16, 2015 Report Posted January 16, 2015 Buy new bits....1/2" shank whenever possible. IMHO that MLCS 15 pc is an ideal starter set. Not very expensive, decent quality, has the most common profiles, doesn't include dozens of redundant or obscure profiles that won't be used, and is very well proven. The other set I've never heard of. Buying cheap unknown, unproven router bits can be dangerous...since there are other excellent options there's really no need to. Strategies for Buying Router Bits Quote
Russell Beeman Posted January 16, 2015 Author Report Posted January 16, 2015 Thanks Scott, I felt pretty good about that set and now I feel even better. And to top it off, my wife is saying I should buy new ones too! Sent from my iPad using Tapatalk Quote
wouldwurker Posted January 16, 2015 Report Posted January 16, 2015 1/2" only. Buy good ones piecemeal and buy em as you need em. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.