Enclosed spaces Posted February 6, 2015 Report Posted February 6, 2015 So I went and did it. After my tablesaw I've had for 30 yrs. ( Foremost ) bit the dust I went to town yesterday and bought myself a Ridgid R4512. Now I get the fun of putting it together and tuning it up. Any helpful hints would be welcome. Quote
Jfitz Posted February 6, 2015 Report Posted February 6, 2015 Congrats! I'm not familiar with that particular saw, but I'm sure others with first-hand experience will chime in. Quote
tcarswell Posted February 6, 2015 Report Posted February 6, 2015 It's a great saw I love mine. Upgrade that blade and It's a formidable machine Quote
knotscott Posted February 6, 2015 Report Posted February 6, 2015 Not meaning to be an alarmist, but that saw did have some known alignment issues that you'll want to check on right away, before you spend hours setting it up. It didn't effect all units, and it may not apply to yours, but many suffered from shifting alignment when the blade height was changed. It'd be aligned dead parallel, then would shift when the blade height was changed. Check for it early so you can exchange it if there's a problem. If not, I agree with the suggestion for a better blade. I've seen some folks add a strip of steel bolted to the bottom of the two piece aluminum fence rail to ensure a smooth transition between the two pieces....you may not need it, but it's food for thought. Congrats and enjoy! Quote
2nd floor Posted February 7, 2015 Report Posted February 7, 2015 I agree, check it out. I bought one and the shift was a good 0.060" when changing the height. I'm took it back and opens the remaining 4 saws they had and they all had the same issue. I ended up with a used Ridgid instead. So far so good. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.