Vyrolan Posted July 9, 2015 Report Posted July 9, 2015 This thread is quickly becoming the best thread on the forum. Everything is always going along fine until somebody ends up with a hammer in their nostril. 1 Quote
Dan Sil Posted May 2 Report Posted May 2 You can order the drive gear from this site. I got two for $80. Minimum order was $80, so $40 each. https://www.champ3d.com/3d-printing-quote Upload the specific printing files to order the part. You can download the 3-D printing files for free from the site below. https://www.printables.com/model/251696-wds1600-drum-sander-drive-gear-replacement I just did this today, so I haven't received the part nor tested it. Until I receive the part and test it, I can't vouch for the service. You can order a plastic printed gear from eBay. But I have concerns about plastic holding up in such a high-stress environment. If I get back to this site, I'll follow up with information about how well the part works. 1 Quote
Dan Sil Posted May 2 Report Posted May 2 I should have mentioned that the part I ordered was stainless steel 1 Quote
Popular Post Dan Sil Posted June 18 Popular Post Report Posted June 18 (edited) Here is an update on the gear I ordered. I installed it in my Drum Sander and it works perfectly. I have an update on the cost. I got a bill from fedex for $25 for import charges so for two gears I paid a bit over $100. The gear is metal but I'm not sure it's stainless steel as described on the web site. It's not magnetic buts it's also not shiny like stainless steel that I'm used to seeing. It seems a lot more sturdy than the plastic ones I have seen advertised. Now I have two gears and I expect that one will last as long as I need it. If someone wants the other one, shoot me an email drdansil@yahoo.com. I'll sell it at my cost. Depending upon shipping it will be in the range of about $60 Edited June 18 by Dan Sil spelling error 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.