Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help figuring out stain color

Featured Replies

Hello Folks, Can anyone please help me figure out this stain color on my front door? I am trying to re-sand and re-stain one side of this front door. I am including two pictures of the same door.

 

Thanks

post-18194-0-92882500-1435960770_thumb.j

post-18194-0-05905900-1435960772_thumb.j

  • Author

Thanks Steve. I just sanded one side of the door. How do I restain that side so it looks similar to the other side? What products do I use?

Do you have any Douglas fir to test finishes on ? Exterior polyurethane finishes add a yellowish tint without any stain. Natural stain is a good place to start.

  • Author

I do not, but I might try it on the door itself. Since I sanded one side it is the white wood color and the other side is the red what you see on the picture. I am assuming if I apply polyurethane to the sanded side it will stay wood color and will not match the redish color on the other side or is it going to turn redish on the sanded side? How do I match the sanded side with the side that is not sanded? Thanks again!

It's so hard to tell from just pictures.. 

 

Like Steve said, find someplace that won't be seen to test on or get some scrap to test.  This looks similar to some cabinets I had from the 70s.  I had to remake a door and had decent luck with Golden Oak stain from Minwax..  It wasn't perfect by any means but, kept the wife happy for a couple years till I could redo all the cabinets.

Sand a small patch of the very top of the door to experiment on. Don't sand the whole edge. You want to see where your test patch is for trial. No one inspects those edges and they typically collect some dust...

  • Author

Is the Golden Oak stain going to turn red yellow/orangeis like the one in the picture? I am thinking since the stain on the picture took long time to turn red yellowis/orangis if Golden Oak stain going to match the existing color as in the picture.

Start with a wet wipe. Water if you must, but better with mineral spirits or alcohol that will flash off quickly. Wood that seems to lack color dry will show it off when made to look wet under finish.

The golden oak is just a starting point..  You'll have to experiment with possible mixing to get the color just how you want it.  Do it in a mason jar with a lid..

 

If you need more red from the golden oak, a little transtint (start with just a few drops and sneak up on it) should do the trick.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.