Recommended Posts

Posted

Kev, I have always routed out the gap,  cut on the band saw, then replaced the removed material with the same thickness of bent stock,  it looks like you skip the router and just lay the laminations in the band saw kerf. Do you ever run into alignment issues going back together?

Posted

And then sand it flush?  I can't wait to try that!

 

thanks for sharing!!

Yea, trim and sand, etc..

Kev, I have always routed out the gap,  cut on the band saw, then replaced the removed material with the same thickness of bent stock,  it looks like you skip the router and just lay the laminations in the band saw kerf. Do you ever run into alignment issues going back together?

Not really because it usually really doesn't matter..  If I were doing something with a cool pattern on the face, then it would be an issue.  If I were doing one here this was going to be an issue, then I would need to remove the thickness of the strip to be used. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 75 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined