PeteJr Posted August 22, 2015 Report Posted August 22, 2015 My Powermatic Drill Press is now a PM2800.5 modelBy replacing the stock knurled nuts with fast thread hex nuts I now have a quick adjust depth stop capability. I gave up about 3/8" quill travel however that was worth it. I purchased the M16 nuts from MCS Industrial Supply. 1 Quote
PeteJr Posted September 4, 2015 Author Report Posted September 4, 2015 I've been using the new stop for a few weeks now and I'm pleased to report it's working very well. Recently drilled a number of 35mm European hinge cup holes in cabinet doors and the stop made setting the proper cup depth fast and accurate. Quote
atlinwi202 Posted September 4, 2015 Report Posted September 4, 2015 Nice addition! Sent from my SAMSUNG-SGH-I337 using Tapatalk Quote
DirtFarmer Jay Posted October 22, 2020 Report Posted October 22, 2020 Pete Jr., thanks for this! I purchased a set of these nuts from Progressive Industries (progressivepii.com) - they cost less both per piece and no shipping was charged, so got 2 nuts for about $33 total. I have the identical model Powermatic Drill Press, and this is a real upgrade! We are hosts of a lifestyle YouTube Channel (dirtfarmerjay) and this will be featured in an upcoming episode. We'll be sure to give you credit for the idea. Best Regards - DirtFarmer Jay Quote
gee-dub Posted October 24, 2020 Report Posted October 24, 2020 They're nice aren't they. I used similar nuts on my shop made setup for a Delta. 1 Quote
bfblack66 Posted November 15, 2022 Report Posted November 15, 2022 I purchased the exact same product from Progressive Industries and on my PM2800 there is not enough room to rotate the fast thread hex nut. The distance across the flats on the nut is approximately 1 3/8". The distance across the points is approximately 1 9/16". Does this nut match yours? Any thoughts? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.