Woody1 Posted October 13, 2015 Report Posted October 13, 2015 (edited) A co-worker is selling his ridgid r4331 planer for $200...good deal? He says it's in good condition barely used. How would I check to make sure it works properly? Never had a planer so I don't know what to look for. Edited October 13, 2015 by Woody1 Quote
Llama Posted October 13, 2015 Report Posted October 13, 2015 I have a Ridgid planer. It is a very good unit, and has served me very well for the last couple of years.The best way to test it would be to run some wood through it Just make sure you aren't taking too much material off with each pass. Quote
Miles11we Posted October 13, 2015 Report Posted October 13, 2015 Idk specifically about the ridged but i have a dewalt lunch box planer that has served me well for a while.Run some wood through it and make sure its cutting so the top face is co-planer with the bottom face. Take some light and heavy cuts to see how she bucks. See what the surface finish is after a light cut, it should be smooth, relatively tear out free (according to grain direction) and lightly scalloped. Crank the height up and look under the hood, see how clean it is and if everything looks alright (id look at pics of new ridgeds to get a lay of the land) If its in fine working order id pay 200 no problem Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.