Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing axe handle

Featured Replies

Hello all, I'm currently putting boiled linseed oil on my new handle, and looking for a couple answers to some questions I have. I came across some people/posts in my searches of blo/turp being used over just blo. Is there any difference in feel doing this? Also, came across a recipe for tin cloth using blo/turp/beeswax and am debating on using that as a final coat for protection and also a bit of grip to the handle. Another question I have is: there are warnings to keep blo away from flame, is this still an issue for the handle after it has cured? No, im not planning on putting the handle in a raging fire, but am debating scorching/singeing the bottom of my handles to bring out the grain more. I'm just curious if it's too late or not. Thanks in advance for any advice, I'll post pictures of examples of what im thinking about. Sent from my SM-G900V using Tapatalk

  • Author

Here is the singed wood look im referring to. fa478d750112881cfd719fa388ef29a6.jpg Here is the pattern I am thinking, so where this handle is painted is where mine would be singed. 3c7c5c9a280687e2980e6349d0fceee7.jpg Is this worth the effort? Sent from my SM-G900V using Tapatalk

Official Caveat:  I have no idea what I'm talking about and you should not listen to any of what I'm about to say.

I think singeing it after the BLO has fully cured should be ok, because the flammable compounds should be fully off-gassed by then.  Good luck!

Fine Print:  Do NOT actually try this, because I have no idea what I'm talking about.  The author of this post cannot be held liable for damages caused by anyone listening to him, because, duh, he has no idea what he is talking about and you were fully warned.  By listening to the clearly wrong and stupid things he wrote in this post, you agree to fully defend, indemnify and hold harmless said author from any all damages incurred as a result of stupidly listening to him, including, without limitation, singed eyebrows, burns, spontaneous full or partial combustion of any limb or other body part(s), hearing loss, gout or other bodily injury.  Offer valid in the continental U.S. only.  All rights reserved.

  • Author

Official Caveat:  I have no idea what I'm talking about and you should not listen to any of what I'm about to say.

I think singeing it after the BLO has fully cured should be ok, because the flammable compounds should be fully off-gassed by then.  Good luck!

Fine Print:  Do NOT actually try this, because I have no idea what I'm talking about.  The author of this post cannot be held liable for damages caused by anyone listening to him, because, duh, he has no idea what he is talking about and you were fully warned.  By listening to the clearly wrong and stupid things he wrote in this post, you agree to fully defend, indemnify and hold harmless said author from any all damages incurred as a result of stupidly listening to him, including, without limitation, singed eyebrows, burns, spontaneous full or partial combustion of any limb or other body part(s), hearing loss, gout or other bodily injury.  Offer valid in the continental U.S. only.  All rights reserved.

Thanks, I guess I could just have my fire extinguisher handy just in case. I have a torch that goes on top of a butane can and also a pencil style torch, the latter seeming to be easier to control. Sent from my SM-G900V using Tapatalk
  • Author

A couple pix so far. Don't mind the foil, I'm hoping it will give me a straight stop line. 5b28eb47d5c33c1309c183661cf38fad.jpga8ac0b6ad219064b564a5420e13b7f20.jpg023b1830cefa99e990cda763a62ee5dc.jpg Sent from my SM-G900V using Tapatalk

  • Author

Here it is, raised up the grain nicely so there's a slight grip. dee77c8e55c0fb874728a9831e0132bf.jpg219eead4e1319fff564f031a951bae33.jpg Sent from my SM-G900V using Tapatalk

The April 2015 (#217) issue of Popular Woodworking has an article on charred surface finishes. They burned the wood totally black. Looks pretty cool on the items the demonstrated, but is probably too far for what you are doing. I like the looks of your axe handle. Seems the foil worked pretty well to make the stop line.

  • Author

The April 2015 (#217) issue of Popular Woodworking has an article on charred surface finishes. They burned the wood totally black. Looks pretty cool on the items the demonstrated, but is probably too far for what you are doing. I like the looks of your axe handle. Seems the foil worked pretty well to make the stop line.

Yeah I'm happy with it. Didn't take too long to do either, plus it was nice out anyways. I'll have to check out that article 19f3d9685d73611bf635d85ecdaf6b2f.jpg Not bad for a $2 torch from eBay. Sent from my SM-G900V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.