Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I am an IDIOT with a bonus

Featured Replies

Long story short, I accidentally stripped one of the Screws on my Moxon hardware and now the handwheel will not travel along it. I sent an email to Jameel to see if I can order a replacement but got a reply saying they are closed until the 29th of Feb. This halts my plans of starting the pair of bookcases that I was going to build. The reason being is that the Moxon hardware is installed on a Joinery Bench that a built a couple years ago. This bench functions as both a joinery bench and as my regular bench.

Now for the bonus. I decided that since I am fully invested in hand tools, that it is time to build a real (semi real) bench. I am not going to build a Roubo yet for a few reasons. For starters, wood selection and cost here in HI is not ideal for the 8' monster, unless I wanted to use Rock Maple, which I don't. I also don't want the weight of the Roubo, nor do I have room for an 8' bench. I needed something smaller and lighter in weight. I have settled on a 6' classic workbench (Benchcrafted) using the Benchcrafted Classic workbench hardware. I have also decided to build the bench out of poplar because it is light weight and cheap. I know poplar is not the ideal workbench material but it makes sense for this bench at this point in time. When I get back stateside, I can worry about building something bigger but still have use for the classic workbench. 

 

Jameel doesn't part-out. You can try, but I've never heard of him replacing damaged parts... It's one of the few complaints folks have with Benchcrafted.

 

==>stripped one of the Screws

You can order ACME threaded rod, nuts, etc from McMaster-Carr...

  • Author
9 hours ago, hhh said:

Jameel doesn't part-out. You can try, but I've never heard of him replacing damaged parts... It's one of the few complaints folks have with Benchcrafted.

 

==>stripped one of the Screws

You can order ACME threaded rod, nuts, etc from McMaster-Carr...

Thanks Trip! 

I was actually able to take some sand paper to the rough parts the screw and smooth them out enough for the hand wheel to move freely along the screw again! Whew! 

Great news on the moxon!  I looked and the classic hardware/plan don't seem to be available apart from the leg vise.

  • Author
1 hour ago, Tony Wilkins said:

Great news on the moxon!  I looked and the classic hardware/plan don't seem to be available apart from the leg vise.

No they are not available yet. Jameel said they should be out sometime this spring. I was just going to try and build without plans.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.