Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

When to Apply Wood Sealer

Featured Replies

I applied a water based wood filler (Crystal Lac) to my mahogany project yesterday. How long do I need to wait before I apply the spray on sealer? I read that I need to wait a while in order to allow the solvents in the sealer to dissipate?

Did you test your finishing schedule on a test board first? If you didn't. Stop and pack your patience. Work your finish schedule on the test board FIRST. 

I would suggest adding a day or two more than the instructions on the can advise. Remember, finishing issues tend to pop up because we are in a rush. LET THING DRY, CURE!

 

-Ace-

  • Author

I did try it on a test board and no problems thus far; however, I'll take your advice and wait a couple of days. Thank you

5 minutes ago, Hammer5573 said:

I did try it on a test board and no problems thus far; however, I'll take your advice and wait a couple of days. Thank you

No problem....however by test board I saying, soup to nuts the entire finishing schedule. ;)

 

-Ace-

18 hours ago, AceHoleInOne said:

Did you test your finishing schedule on a test board first? If you didn't. Stop and pack your patience. Work your finish schedule on the test board FIRST. 

I would suggest adding a day or two more than the instructions on the can advise. Remember, finishing issues tend to pop up because we are in a rush. LET THING DRY, CURE!

 

-Ace-

I am with Ace - pushing the finish products always ended in failure for me. You can't cheat the finishing process.

Adding a little extra time to allow for products to fully dry & cure is a lot less of an issue than ending up with a project that starts chipping and peeling. Often, the issues do not reveal themselves right away - I learned the hard way. 

The products usually have manufacturers recommendations right on the can, but be advised the dry times are usually listed for 70° or 75° and most shops are running cooler than that which adds to dry times. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.